Damn man, congrats!

 

Good deal! How much psi? Got more left in her with the same engine?

 

It has a little more left in it. I had to pull about 14 degrees of timing at the hit just to get it to leave. I was leaving on a total of 7 degrees of timing and ramping up then back down from there. So on a good track where I don't have to do that, it outta pick up a tenth or two.

I've got a couple of things to try that will pick it up a bit more, and that will probably be that with this motor. I'm gonna guess the limit to be about 8.70's with this motor. I guess I'll upgrade to some 6-bolt stuff after that and stop screwing around.

 

O'yea, boost was 2x lbs.

 

Where's the vids?

 

Badass man. Congrats!

 

care to post the whole slip? id love to see the 60 and 330...

and the eighth too!

 

well a time ago you said if that truck wouldnt break 8´s you would be very disapointed, there you have your 8 second truck, just dont stop there lol

 

Here are the slips of the 9.14 and 8.99 pass. The reason I'll show both is so that you can see there is a little left. The 60' and 330' were better on the 9.14 pass cause the track was better and we didn't have near the power pulled out of it. The weather was much better in March as well.

 

Guys,

I need a stock spindle for a 2006 1/2 2wd truck. Let me know what you got.