BurntBurb's Gas Sipper ('90 Subaru Legacy)
#21
On The Tree
Thread Starter
Join Date: Nov 2011
Location: Bellingham WA
Posts: 130
Likes: 0
Received 0 Likes
on
0 Posts
Ok so I got the bar painted, mounted, replaced all nuts with nyloc nuts, and mounted the lights, I am praying I can get all the wireing sorted out this weekend. Other than that I have a spoiler that I got that I need to install but that will probably wait till another weekend. I have the idea rolling in my head of camo headliner.
#26
On The Tree
Thread Starter
Join Date: Nov 2011
Location: Bellingham WA
Posts: 130
Likes: 0
Received 0 Likes
on
0 Posts
262_NBS, Yeah I am considering some coil boosters just to give me a little bit of lift, I don't want to go really high just because I don't want to be wearing on joints, I am constantly reminding my self that I bought this to be a reliable cheap daily driver.
nonnieselman, Thanks I am having fun doing all these cheap mods. And yeah I would sad that the Hella FF series lights are the best bang for your buck.
Now for the lights,
Okay so obviously the pics don't do it justice but here it goes. I got them wired up and aimed. All i have to do with them now is clean up the exposed wires with some split loom.
head lights off
head lights on low beam
500s
700s
All
And another compairason between headlights and all on
and I put some tape along the top edge of the 700s so they are not blinding back at me.
nonnieselman, Thanks I am having fun doing all these cheap mods. And yeah I would sad that the Hella FF series lights are the best bang for your buck.
Now for the lights,
Okay so obviously the pics don't do it justice but here it goes. I got them wired up and aimed. All i have to do with them now is clean up the exposed wires with some split loom.
head lights off
head lights on low beam
500s
700s
All
And another compairason between headlights and all on
and I put some tape along the top edge of the 700s so they are not blinding back at me.
Thread
Thread Starter
Forum
Replies
Last Post
nic351
Tuning, Diagnostics, Electronics, and Wiring
1
09-24-2015 09:43 AM