Dan's RC Revival
#41
TECH Junkie
Thread Starter
Join Date: Jun 2014
Location: At the dump with a clutch
Posts: 3,133
Received 781 Likes
on
571 Posts
These are advanced high friction rotors
Might get to it tomorrow, I have the trailer hooked up to grab it from work but didn’t bring any power tools. I barely know how to work a ratchet or a wrench now that I have the M12 ratchet.
Might get to it tomorrow, I have the trailer hooked up to grab it from work but didn’t bring any power tools. I barely know how to work a ratchet or a wrench now that I have the M12 ratchet.
The following users liked this post:
dantheman1540 (12-07-2021)
#43
TECH Veteran
Yeah I want one of those so bad. I saw a set on sale for half off, $220 instead of $440, but I can't justify a purchase right now
The following users liked this post:
dantheman1540 (12-07-2021)
#44
TECH Veteran
iTrader: (5)
I guess I better get on this M12 train. I almost bought an air ratchet last night. Might still. An old Chicago Pneumatic 1/4" that had been rebuilt (note, completely different than you cheap bois and your central pneumatic harbor fright bullshit)
Was pretty cheap, and was old enough it was still US made
Also Dan, I was thinking about you #nohomo and I'd get those rotors measured and maybe cut if they need it. Otherwise take them to your powder buddy for a blasting and paint the hubs black. I bet contrary to the jokes, they actually are fine
I bought this DTM ready to spray chassis black, and a Finex 3000 w/ a 1.5mm tip. I plan to practice on the Ranger with it before moving to higher quality projects, like the Tahoe (will post link later, can't find **** captain)
Summit has a satin black I think I'd rather do over gloss:Black Paint Matters
Was pretty cheap, and was old enough it was still US made
Also Dan, I was thinking about you #nohomo and I'd get those rotors measured and maybe cut if they need it. Otherwise take them to your powder buddy for a blasting and paint the hubs black. I bet contrary to the jokes, they actually are fine
I bought this DTM ready to spray chassis black, and a Finex 3000 w/ a 1.5mm tip. I plan to practice on the Ranger with it before moving to higher quality projects, like the Tahoe (will post link later, can't find **** captain)
Summit has a satin black I think I'd rather do over gloss:Black Paint Matters
The following users liked this post:
dantheman1540 (12-07-2021)
The following users liked this post:
dantheman1540 (12-07-2021)
#46
TECH Veteran
Yeah it was like that but it came with the gun too and two batteries. Shoulda specified what set was lol, even still I can't justify that right now. Ya boi about to be student loan debt free in a couple weeks
In regards to the air ratchet I have a 3/8" air ratchet that I loathe. The hose just constantly gets in the way and I can never get it angled just right.
In regards to the air ratchet I have a 3/8" air ratchet that I loathe. The hose just constantly gets in the way and I can never get it angled just right.
The following users liked this post:
dantheman1540 (12-07-2021)
The following 3 users liked this post by wretched73:
#48
TECH Veteran
Oh yeah definitely so everyone can laugh at my Kobalt Kollection
The following 2 users liked this post by shakenfake:
dantheman1540 (12-07-2021),
tjmath (12-07-2021)
#50
TECH Junkie
Thread Starter
Join Date: Jun 2014
Location: At the dump with a clutch
Posts: 3,133
Received 781 Likes
on
571 Posts
I guess I better get on this M12 train. I almost bought an air ratchet last night. Might still. An old Chicago Pneumatic 1/4" that had been rebuilt (note, completely different than you cheap bois and your central pneumatic harbor fright bullshit)
Was pretty cheap, and was old enough it was still US made
Also Dan, I was thinking about you #nohomo and I'd get those rotors measured and maybe cut if they need it. Otherwise take them to your powder buddy for a blasting and paint the hubs black. I bet contrary to the jokes, they actually are fine
I bought this DTM ready to spray chassis black, and a Finex 3000 w/ a 1.5mm tip. I plan to practice on the Ranger with it before moving to higher quality projects, like the Tahoe (will post link later, can't find **** captain)
Summit has a satin black I think I'd rather do over gloss:Black Paint Matters
Was pretty cheap, and was old enough it was still US made
Also Dan, I was thinking about you #nohomo and I'd get those rotors measured and maybe cut if they need it. Otherwise take them to your powder buddy for a blasting and paint the hubs black. I bet contrary to the jokes, they actually are fine
I bought this DTM ready to spray chassis black, and a Finex 3000 w/ a 1.5mm tip. I plan to practice on the Ranger with it before moving to higher quality projects, like the Tahoe (will post link later, can't find **** captain)
Summit has a satin black I think I'd rather do over gloss:Black Paint Matters
Secondly don’t buy any ratchets just go buy an M12 battery and charger, trust me.
Rotors can’t be that expensive to replace them but I’ll look at them better when I start inspecting, I know there an OhRiellys that turns them for a few bucks.
I like satin for axles and I love Chassis saver brush on paint, a lot less mess then spray imo.
I had Porter cable for years and it still does all my wood working, cheap isn’t always bad.
The following users liked this post:
arthursc2 (12-07-2021)