Dan's RC Revival
The following users liked this post:
tjmath (12-07-2021)
12-07-2021, 09:41 AM
#54
TECH Junkie
Thread Starter
Join Date: Jun 2014
Location: At the dump with a clutch
Posts: 3,133
Received 781 Likes
on
571 Posts
Anyone know if there’s a bigger rotor for the rear of the H2s? Since they use NBS front calipers in the rear the 2020+ 4pots should bolt right up but obviously you’d need a bigger rotor as well.
12-07-2021, 09:45 AM
#55
Being that its an 8 lug axle, unlikely
You also can't directly swap to 6 lug axles because of the housing width
Its already bigger than what you got, so why you trippin? Basically you've put NBS fronts on the rear of your truck, do 2020+ up front and be done with it, until SAS
You also can't directly swap to 6 lug axles because of the housing width
Its already bigger than what you got, so why you trippin? Basically you've put NBS fronts on the rear of your truck, do 2020+ up front and be done with it, until SAS
12-07-2021, 09:46 AM
#56
TECH Veteran
First off gay
Basically yes
Agreed although my impact gun is nice and will beat out electric any day of the week so...
$20 a rotor at O'Reilly
Oh yeah no those Kobalt tools are the ****
Basically yes
Agreed although my impact gun is nice and will beat out electric any day of the week so...
12-07-2021, 09:52 AM
#57
IDK about that claim your impact will beat out electric any day....
I have a video I'll post later of me trying to remove the crank bolt on my 3S motor. My pneumatic is rated at like 1150ft/lb break free torque, it couldn't do it. Milwaukee M18 1/2" busted that bitch right off
I have a video I'll post later of me trying to remove the crank bolt on my 3S motor. My pneumatic is rated at like 1150ft/lb break free torque, it couldn't do it. Milwaukee M18 1/2" busted that bitch right off
12-07-2021, 09:56 AM
#58
TECH Junkie
Thread Starter
Join Date: Jun 2014
Location: At the dump with a clutch
Posts: 3,133
Received 781 Likes
on
571 Posts
Secondly, your air gun probably won't beat the M18 max torque boi unless you have a 2 hander and even if it is stronger I'd rather not be leashed to a damn compressor. Maybe you like bondage tho.
$20 is good
I had a lot of hope for those Kobalt tools when they first came out but Milwaukee is still King Ding-a-Ling when it comes to automotive power tools.
IDK about that claim your impact will beat out electric any day....
I have a video I'll post later of me trying to remove the crank bolt on my 3S motor. My pneumatic is rated at like 1150ft/lb break free torque, it couldn't do it. Milwaukee M18 1/2" busted that bitch right off
I have a video I'll post later of me trying to remove the crank bolt on my 3S motor. My pneumatic is rated at like 1150ft/lb break free torque, it couldn't do it. Milwaukee M18 1/2" busted that bitch right off
12-07-2021, 09:58 AM
#59
TECH Veteran
Damn maybe I really do need an M18....
You right though that ain't gay, as long as we are thinking about the same thing here... MHBHJ anyone?
You right though that ain't gay, as long as we are thinking about the same thing here... MHBHJ anyone?
12-07-2021, 10:06 AM
#60
TECH Junkie
Thread Starter
Join Date: Jun 2014
Location: At the dump with a clutch
Posts: 3,133
Received 781 Likes
on
571 Posts
What is MHBHJ? I googled and the only thing that popped up was some Arabic symbols and Corn Hub with a P.