El Bandito
10-18-2021, 07:18 PM
#481
TECH Resident
But still don't call it a rock truck.
The following 3 users liked this post by tjmath:
10-18-2021, 07:19 PM
#482
TECH Veteran
Thread Starter
Laugh out loud
Hopefully get the two missing bed bolts I have from work tomorrow. Just need two and 4 washers. That'll kick down one of my tasks
Hopefully get the two missing bed bolts I have from work tomorrow. Just need two and 4 washers. That'll kick down one of my tasks
10-18-2021, 10:10 PM
#483
TECH Junkie
Join Date: Jun 2014
Location: At the dump with a clutch
Posts: 3,133
Received 781 Likes
on
571 Posts
I think everyone should add these to their trucks... regardless if they use them off road or not.
https://dirtkingfabrication.com/coll...cams-dk-632919
I did them on mine when I did my UCA's and have beat, run off road, and even jumped my truck with zero issues of coming out of alignment at all. When I had it aligned they did charge me a little more than a normal alignment because they have to actually loosen and retighten to move the alignment cam to the next hole but it was completely worth it.
https://dirtkingfabrication.com/coll...cams-dk-632919
I did them on mine when I did my UCA's and have beat, run off road, and even jumped my truck with zero issues of coming out of alignment at all. When I had it aligned they did charge me a little more than a normal alignment because they have to actually loosen and retighten to move the alignment cam to the next hole but it was completely worth it.
10-19-2021, 08:00 AM
#484
TECH Veteran
Thread Starter
Well plans changed. I bought completely new UCAs 2 degree adjustables with ball joints already pressed in. Decided that since I am doing all this work I might as well replace the 23 year old bushings and ball joints etc.
This truck better ride like a dream cause it is putting my wallet to sleep!
This truck better ride like a dream cause it is putting my wallet to sleep!
Last edited by shakenfake; 10-19-2021 at 08:19 AM.
10-19-2021, 08:09 AM
#485
TECH Junkie
Join Date: Jun 2014
Location: At the dump with a clutch
Posts: 3,133
Received 781 Likes
on
571 Posts
Hopefully, your doing rubber bushings instead of poly or Delrin, I try to stick with rubber wherever I can it makes stuff a tad less harsh.
What UCAs did you get?
What UCAs did you get?
The following users liked this post:
tjmath (10-19-2021)
10-19-2021, 08:20 AM
#487
TECH Veteran
Thread Starter
I haven't bought the uppers yet but I was looking at these Moog uppers, ball joint already in with 2 degrees of adjustment
https://www.rockauto.com/en/moreinfo...10401&jsn=1094
Brakes get here on Friday
Rear main seal kit and rack and pinion replacement boot get here on Saturday so it says
https://www.rockauto.com/en/moreinfo...10401&jsn=1094
Brakes get here on Friday
Rear main seal kit and rack and pinion replacement boot get here on Saturday so it says
10-19-2021, 08:24 AM
#489
TECH Veteran
Thread Starter
Gimme two years 
The following users liked this post:
arthursc2 (10-19-2021)