El Bandito
#501
TECH Veteran
Thread Starter
I wrote that very asleep.
I don't know how well a drill is going to do because it will not have anything to grab onto on that one side. I was thinking about using my die grinder and expanding the first hole.
My drill press might work though but I don't even know the last time that thing was turned on
I don't know how well a drill is going to do because it will not have anything to grab onto on that one side. I was thinking about using my die grinder and expanding the first hole.
My drill press might work though but I don't even know the last time that thing was turned on
#503
TECH Veteran
Thread Starter
Ahhh good idea did not think about that one.
#505
TECH Veteran
Thread Starter
Not perfect but it will do I guess. The nut may be in the way of the stud though so I might have to shear off the end of it. Gonna be gay
#506
TECH Veteran
Thread Starter
Now my LCA and UCA don't line up with the knuckle lol I love this. If I am missing something someone point it out but it looks like another weekend with no progress. and another one after this because I am going on vacation fml
You should be able to see the top of the knuckle is nowhere near the UCA ball joint. Any ideas? This project gets more frustrating each time I work on it.
You should be able to see the top of the knuckle is nowhere near the UCA ball joint. Any ideas? This project gets more frustrating each time I work on it.
#508
TECH Veteran
Thread Starter
I think I have my camber plates set too far back. If I readjusted them then I think the UCA should fit in the knuckle.
Basically I can’t get the UCA into the knuckle. Not sure exactly why.
Edit: In that photo the knuckle physically cannot go any farther back. I am guessing I need the DJM UCA as well? I see now that the picture is pretty trash lol I was tired and had already hit my head once last night leading to my last 10 braincells vanishing.
Basically I can’t get the UCA into the knuckle. Not sure exactly why.
Edit: In that photo the knuckle physically cannot go any farther back. I am guessing I need the DJM UCA as well? I see now that the picture is pretty trash lol I was tired and had already hit my head once last night leading to my last 10 braincells vanishing.
Last edited by shakenfake; 11-05-2021 at 07:52 AM.
#510
TECH Veteran
Thread Starter
My girly arms prevent me from being a man unfortunately
The spindle physically cannot move back anymore. Unless I am retarded but I pushed on it and it goes nowhere.
I created a new thread about this so others may be able to chime in if they don't watch my thread.
The spindle physically cannot move back anymore. Unless I am retarded but I pushed on it and it goes nowhere.
I created a new thread about this so others may be able to chime in if they don't watch my thread.