Gray Ghost turbo 427 LSX build
#54
TECH Apprentice
Thread Starter
iTrader: (1)
Join Date: Oct 2011
Posts: 389
Likes: 0
Received 0 Likes
on
0 Posts
Well, I'm not really looking to sell them out right. Ya know?
But they're year 2012 castings, 3/4 inch deck, 2.180 and 1.65 valves. Arguably the best valves that can be installed. Sodium exhausts for high heat, titanium intakes, complete port and polish by WCCH. 76cc chambers. 4.110" diameter bore on the chambers.
I'm kind of bouncing back and forth wether to use them or not. The MAST heads are rediculously expensive. Pop is out of money and I just dumped a ton on the turbo kit. :/
But they're year 2012 castings, 3/4 inch deck, 2.180 and 1.65 valves. Arguably the best valves that can be installed. Sodium exhausts for high heat, titanium intakes, complete port and polish by WCCH. 76cc chambers. 4.110" diameter bore on the chambers.
I'm kind of bouncing back and forth wether to use them or not. The MAST heads are rediculously expensive. Pop is out of money and I just dumped a ton on the turbo kit. :/
#55
TECH Apprentice
Thread Starter
iTrader: (1)
Join Date: Oct 2011
Posts: 389
Likes: 0
Received 0 Likes
on
0 Posts
USPS and UPS brought me about 3/4 of all my fuel system stuff from Summit, along with gauges, and a sweet pillar setup.
Still waiting on a new fuel filter and my in-tank parts from HFP and Aeromotive.
Still waiting on a new fuel filter and my in-tank parts from HFP and Aeromotive.