PROJECTS GALLERY Vehicle builds | Engine Swaps | Conversions | Installation write ups |

I broke'did my toy... Kenne Bell/370 rebuild

Thread Tools
 
Search this Thread
 
Old 07-02-2022 | 12:13 PM
  #231  
BigKID's Avatar
Thread Starter
TECH Veteran
iTrader: (5)
 
Joined: Dec 2001
Posts: 4,850
Likes: 141
From: Panama City, Fl
Default

I was playing around with the GoPro at LS Fest TX to see if I could learn anything about the runs from suspension or my driving after the fact. Looks pretty tame watching these vids. It feels a bit more chaotic in the driver seat.

The TrackX was my favorite of the 4 events compising the Grand Champion Challenge (AutoX, TrackX, 3S, Drag). I could get into this road course stuff.

I had some issues with the GoPro on Friday so did not get my best AutoX runs but this is the best of what I captured...

I did a little better at 3S than AutoX but seeing these vids shows me where I can pick up some speed...

Same 3S run from a buddy's point of view..

Last edited by BigKID; 07-02-2022 at 12:21 PM.
The following 2 users liked this post by BigKID:
Jeff71 (07-05-2022), wretched73 (07-02-2022)
Old 07-02-2022 | 12:44 PM
  #232  
TXsilverado's Avatar
Moderator
iTrader: (19)
 
Joined: Jan 2005
Posts: 18,324
Likes: 234
From: Humble Texas
Default

How did you fair against the competition?
Old 07-03-2022 | 01:12 PM
  #233  
BigKID's Avatar
Thread Starter
TECH Veteran
iTrader: (5)
 
Joined: Dec 2001
Posts: 4,850
Likes: 141
From: Panama City, Fl
Default

For Grand Champion official standings, I was 6th out of 14 in the Truck class and 31st out of 93 overall. Of the 5 trucks ahead of me, 2 are full chassis trucks and the other 3 are pretty much purpose build race trucks with good drivers. That was just for Saturday's Autox, 3S and Friday's drag race as they lost our AutoX and TrackX times from Friday. I had my best AutoX run on Friday and my TrackX time would have likely scored more points. I did horrible in the drag race as I could not get any traction on the virgin 'no-prep' pit row. I think my best pass there was an 8.65. :shame: That's where I need to play with the adjustability in the rear suspension to go from good handling to max straight line traction.
Old 07-03-2022 | 06:18 PM
  #234  
shakenfake's Avatar
TECH Veteran
 
Joined: Nov 2019
Posts: 4,112
Likes: 1,290
From: Shlumpt, TX
Default

Bad *** videos!
Old 05-30-2023 | 09:54 AM
  #235  
BigKID's Avatar
Thread Starter
TECH Veteran
iTrader: (5)
 
Joined: Dec 2001
Posts: 4,850
Likes: 141
From: Panama City, Fl
Default

I have not made many changes to the truck over the last few events. I am trying to learn to translate what I feel in the truck when on course to what I need to change to make it handle better. Also been working on my driving technique. At PTTS back in April, I did learn I have been going the wrong way on tire pressures on this pig to prevent it from pushing in tight corners. It likes 40psi to keep from rolling the tire. Other than that, I did install a 4 point harness to keep me in the seat so I can focus on steering and petal modulation rather than holding myself in. It did seem to help last weekend at LS Fest TX.

Now for some gratuitous track pics...
Auto X...




Track X...




Drag Race...


Unfortunately, I had forgotten to pack the gopro for the last two events so no videos to share.
The following 5 users liked this post by BigKID:
ALL ULL C (05-30-2023), Bgbldodge (05-30-2023), Jeff71 (05-31-2023), strutaeng (05-30-2023), wretched73 (05-30-2023)
Old 05-30-2023 | 04:36 PM
  #236  
shakenfake's Avatar
TECH Veteran
 
Joined: Nov 2019
Posts: 4,112
Likes: 1,290
From: Shlumpt, TX
Default

What is your exhaust set up? Any pics of the exit as well?
Old 05-30-2023 | 09:19 PM
  #237  
BigKID's Avatar
Thread Starter
TECH Veteran
iTrader: (5)
 
Joined: Dec 2001
Posts: 4,850
Likes: 141
From: Panama City, Fl
Default

Kooks 1-7/8 to 2" fbody headers > 3" intermediate tubes > Flowmaster 3"-4" merge > MBRP diesel muffler > 4" over the axle > 4" Dynomax bullet > 4" dumped at corner of bumper. You can somewhat see the exit in the first TrackX pic in post above.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
gcsd3742
Midsize & Compact Trucks
4
04-11-2012 10:45 PM
RED04REGENCYRST
SHOW & SHINE DISCUSSION
26
08-03-2011 02:32 PM
Code Red
PROJECTS GALLERY
16
04-12-2011 12:17 AM
Escalarado
MULTIMEDIA (truck related)
78
04-08-2011 08:08 AM
Flaco
FORCED INDUCTION
76
10-05-2009 08:34 AM



Quick Reply: I broke'did my toy... Kenne Bell/370 rebuild



All times are GMT -5. The time now is 10:28 PM.