Just another 6.0 build
#1
Launching!
Thread Starter
iTrader: (4)
Join Date: Jun 2011
Posts: 250
Likes: 0
Received 0 Likes
on
0 Posts
Just another 6.0 build
Well decided instead of workin on the 5.3, ill just build something i want and be done . Started out with a $400 complete lq4 to go in the 01 sierra ecsb, got it tore down and ready to take to the machine shop. wanted just to build something mild thats street friendly as the truck is my daily. got my cam package in a couple days ago and picked everything up at the machine shop today..... Startin to get excited about it.
This is my list, nothing crazy....
Texas Speed Torquer V.2 cam package w/pac double springs and 7.4 p-rods
TSP ported and shimmed oil pump
Ls7 lifters
Billet single roller adjustable timing chain
Bored 30 over w/dished pistons
Now just waiting to get all my gaskets and for the injectors to be rebuilt. Heres a few pics. Any advice on sealing the gaskets up would be much appreciated.
This is my list, nothing crazy....
Texas Speed Torquer V.2 cam package w/pac double springs and 7.4 p-rods
TSP ported and shimmed oil pump
Ls7 lifters
Billet single roller adjustable timing chain
Bored 30 over w/dished pistons
Now just waiting to get all my gaskets and for the injectors to be rebuilt. Heres a few pics. Any advice on sealing the gaskets up would be much appreciated.
#7
Launching!
Thread Starter
iTrader: (4)
Join Date: Jun 2011
Posts: 250
Likes: 0
Received 0 Likes
on
0 Posts
got the victor reinz gasket set today, finally get to start putting this thing together. maybe start pulling the 5.3 next weekend!
so what what ive read, install these gaskets clean and dry and only use a little silicone where the covers meet the pan?? anybody have any input?
so what what ive read, install these gaskets clean and dry and only use a little silicone where the covers meet the pan?? anybody have any input?
Last edited by SlickSierra; 07-13-2011 at 06:46 PM.