LSX 438 Twin Turbo
#1211
TECH Addict
Thread Starter
Join Date: Jul 2005
Location: Stockton, CA
Posts: 2,060
Likes: 0
Received 0 Likes
on
0 Posts
I will also take out tranny, transfer case, rear end, drive shafts, and the Quadrasteer unit and put it into the new truck.
starting to get excited
Mark
#1212
blownerator
iTrader: (20)
Thought it was about time for an update,
bought another 04 Denali with 78,000 miles.
it is in kinda rough shape and I really don't like driving it. every time I drive it and I hear a rattle, shake or noise that my other Truck didn't have I get kinda bummed out. So the other day when I was driving it I started thinking that I need to do something with this.
SO LET THE NEW BUILD BEGIN
my old truck is now at Synergy Motorsports,
the engine will be pulled out and gone through, the compression ratio will be raised in preparation for the TVS 2300 to be put on it.
Heads will be sent in to see if they can be saved and Finish line Transmission we be doing my transmission again.
all new Leather interior will be put in along with all new dash pieces.
I will need a complete new paint job on it because there is no way to make this paint job look anywhere close to my old truck.
I like Silver Birch (pewter) so I will paint it that color again but with either more metal flake or Pearl, something to make it POP!!!!!!!!!
anywY I will keep you guys posted.
Mark
bought another 04 Denali with 78,000 miles.
it is in kinda rough shape and I really don't like driving it. every time I drive it and I hear a rattle, shake or noise that my other Truck didn't have I get kinda bummed out. So the other day when I was driving it I started thinking that I need to do something with this.
SO LET THE NEW BUILD BEGIN
my old truck is now at Synergy Motorsports,
the engine will be pulled out and gone through, the compression ratio will be raised in preparation for the TVS 2300 to be put on it.
Heads will be sent in to see if they can be saved and Finish line Transmission we be doing my transmission again.
all new Leather interior will be put in along with all new dash pieces.
I will need a complete new paint job on it because there is no way to make this paint job look anywhere close to my old truck.
I like Silver Birch (pewter) so I will paint it that color again but with either more metal flake or Pearl, something to make it POP!!!!!!!!!
anywY I will keep you guys posted.
Mark
#1213
Staging Lane
iTrader: (3)
badass....nice to see you dont let a little mishap keep you from building again...but why not twins again???....they are sooo much cooler...im not gonna lie you had some good pics and should us how to fab up my kit we are doing on mine...if turbonectics would ever get off there asses and send me the turbos i ordered 2 months ago it would already be done lol
#1214
TECH Addict
Thread Starter
Join Date: Jul 2005
Location: Stockton, CA
Posts: 2,060
Likes: 0
Received 0 Likes
on
0 Posts
Brian I will be giving you a call early next year for the TVS
twins are to expensive and I do not have an unlimited budget like I did on my first set up, this will be a budget build, but don't get me wrong- it will be done first rate and it will be a BAD A$$ truck, I just can't dump 50 plus G's into it.
Mark
Mark
#1216
TECH Veteran
Good to see those parts going to a good use. I think I was one of the first to ask if anything was still good. Why pay twice for what you already have. After your mess it is good to take anything positive out of it that you can. A TVS2300 will be all you need. 8psi of boost and a 438 with a mild cam should be torquey as hell and run 11's while driving like stock.