My 03z-71...still a work in progress
03-16-2012, 02:12 PM
#46
TECH Apprentice
Thread Starter
Join Date: Jun 2008
Posts: 310
Likes: 0
Received 0 Likes
on
0 Posts
I figured I would kinda combine my audio build from a few years back in to this as an all in one thing.
Removed old amp rack and trim all the way up to the front seats. I managed to get 2 layers on the rear wall. I also got 1 layer (all i am doing here) on the rear floor!
Snapped a few pics! This shows the floor...so you know i did the rammat up to the front seats and center console just didn't get a pic
Half way...
Done for first night!
Removed old amp rack and trim all the way up to the front seats. I managed to get 2 layers on the rear wall. I also got 1 layer (all i am doing here) on the rear floor!
Snapped a few pics! This shows the floor...so you know i did the rammat up to the front seats and center console just didn't get a pic
Half way...
Done for first night!
03-16-2012, 02:14 PM
#47
TECH Apprentice
Thread Starter
Join Date: Jun 2008
Posts: 310
Likes: 0
Received 0 Likes
on
0 Posts
1 roll of rammat got me here!
2 layers on rear wall
1 layer on the rear floor (up to center console)
1 layer on the outer skin of ext. cab doors
Part of the way through the inner skin on one ex. cab door
Ugly factory harness before
After cleaning up the factory harness (going to get some ties to stick it to the wall)
2 layers on rear wall
1 layer on the rear floor (up to center console)
1 layer on the outer skin of ext. cab doors
Part of the way through the inner skin on one ex. cab door
Ugly factory harness before
After cleaning up the factory harness (going to get some ties to stick it to the wall)
03-16-2012, 02:18 PM
#48
TECH Apprentice
Thread Starter
Join Date: Jun 2008
Posts: 310
Likes: 0
Received 0 Likes
on
0 Posts
I feed the wires through under the seat to keep everything out of my doorsills!
I tried to keep the wires nice and neat! Ty-raped everything together to where they were going. I'm still going to get some black covers for the all wires... DOn't judge me yet!
Seat installed and everything!
I tried to keep the wires nice and neat! Ty-raped everything together to where they were going. I'm still going to get some black covers for the all wires... DOn't judge me yet!
Seat installed and everything!
03-16-2012, 02:20 PM
#49
TECH Apprentice
Thread Starter
Join Date: Jun 2008
Posts: 310
Likes: 0
Received 0 Likes
on
0 Posts
a pic of Second Skin Speaker Tweaker kit!
Also a pic of the roll of Rammat...
Image Dynamics OEM 6.5"s mids!
This is how many holes are in the ext. cab door...:crazy: Note the hole where i don't use a speaker in the ext. cab doors!
After Rammat and aluminum screen door mesh over the holes! I doubled aluminum up and used self taping screws to screw them to the door!
Front door with all the big holes again!! LOL
Also a pic of the roll of Rammat...
Image Dynamics OEM 6.5"s mids!
This is how many holes are in the ext. cab door...:crazy: Note the hole where i don't use a speaker in the ext. cab doors!
After Rammat and aluminum screen door mesh over the holes! I doubled aluminum up and used self taping screws to screw them to the door!
Front door with all the big holes again!! LOL
03-16-2012, 02:22 PM
#50
TECH Apprentice
Thread Starter
Join Date: Jun 2008
Posts: 310
Likes: 0
Received 0 Likes
on
0 Posts
Yeah tell me about it man! I started working on it at 9:30 and took lunch at 12:30 all i got done by then was the driver side ext. cab door! then from 1:30 to 4:30 I got the driver side door done. THOSE doors take forever!
I was taking my time because i din't want to rush and mess up nothing! Gonna start on the pass side tomorrow
more pics...
I took the factory straps for the wire harness out and used sticky backs and tie raps instead. That cleaned it up alot!
OEM's in the doors!
I was taking my time because i din't want to rush and mess up nothing! Gonna start on the pass side tomorrow
more pics...
I took the factory straps for the wire harness out and used sticky backs and tie raps instead. That cleaned it up alot!
OEM's in the doors!