My 2007 Silverado Build...again
#151
Well as my other thread states, my goal was accomplished...but we ain't done yet!
11.68 @ 114 with a 1.68 60'
After all the smack I talk about 6.0's, I finally decided it was best to get more cubes, so I did on a budget. dirt_track_racer_81 built me a .005 over 6.0, that uses stock ls2 rods and a stock crank to give me 365c.i.. I'm going to end up spraying a pretty healthy shot so the rings are gapped pretty big and the cam was spec'd for nitrous, and I'm running -7 plugs now instead of the tr55 or tr6.
So...new combo
365c.i.
799 heads milled .030
Lunati .660 springs
Comp pushrods
LS7 lifters
.055 head gasket
Pat G nitrous cam
Pacesetter long tubes
dual 3" exhaust to flowmaster y-merge and 4" magnaflow mufferl
Changes to come:
New shocks
New slicks
New converter
11.68 @ 114 with a 1.68 60'
After all the smack I talk about 6.0's, I finally decided it was best to get more cubes, so I did on a budget. dirt_track_racer_81 built me a .005 over 6.0, that uses stock ls2 rods and a stock crank to give me 365c.i.. I'm going to end up spraying a pretty healthy shot so the rings are gapped pretty big and the cam was spec'd for nitrous, and I'm running -7 plugs now instead of the tr55 or tr6.
So...new combo
365c.i.
799 heads milled .030
Lunati .660 springs
Comp pushrods
LS7 lifters
.055 head gasket
Pat G nitrous cam
Pacesetter long tubes
dual 3" exhaust to flowmaster y-merge and 4" magnaflow mufferl
Changes to come:
New shocks
New slicks
New converter