My ongoing project
05-01-2010, 12:28 PM
#91
TECH Fanatic
Thread Starter
iTrader: (8)
Join Date: Jun 2009
Location: pascagoula, mississippi
Posts: 1,037
Likes: 0
Received 1 Like
on
1 Post
played with the bottle posistion more and i got it all mounted up.....
closed...
open...
bottle heater relay
didnt even lose cup holders, just change tray....im going to fill the open area with some abs and you wont even know it was there...
also played with solenoid location and i got a good idea were there gona be, just need to make mounts.
and i think im gona need a shorter main feed line because i have like 7 extra feet that i cant stuff anywere!
closed...
open...
bottle heater relay
didnt even lose cup holders, just change tray....im going to fill the open area with some abs and you wont even know it was there...
also played with solenoid location and i got a good idea were there gona be, just need to make mounts.
and i think im gona need a shorter main feed line because i have like 7 extra feet that i cant stuff anywere!
Last edited by Black'Rado; 05-23-2010 at 10:12 PM.
05-02-2010, 09:59 PM
#93
TECH Fanatic
Thread Starter
iTrader: (8)
Join Date: Jun 2009
Location: pascagoula, mississippi
Posts: 1,037
Likes: 0
Received 1 Like
on
1 Post
mounted my solenoids today...
bent up some sheat metal and mounted them to the engine cover braket
hard to see but the nitrous noid is in there...
fuel noid...
cant even see the nitrous side
cant see fuel side or hoses, i loomed the fuel lines so its all hidden
i need to order a shorter main feed line, nitrous outlet plate, put tr6 plugs in, get wideband
bent up some sheat metal and mounted them to the engine cover braket
hard to see but the nitrous noid is in there...
fuel noid...
cant even see the nitrous side
cant see fuel side or hoses, i loomed the fuel lines so its all hidden
i need to order a shorter main feed line, nitrous outlet plate, put tr6 plugs in, get wideband
Last edited by Black'Rado; 04-05-2011 at 11:18 AM.
05-10-2010, 05:41 PM
#94
05-10-2010, 06:27 PM
#96
TECH Fanatic
Thread Starter
iTrader: (8)
Join Date: Jun 2009
Location: pascagoula, mississippi
Posts: 1,037
Likes: 0
Received 1 Like
on
1 Post
ill get pics soon.
i was jus leavin a stop sign, no romping or nothin just easy drivin and i herd a pop and the rear end started howling bad and i could feel the truck kinda walk sideways when i got on the gas. i thought it was a c clip but tore it apart today and it busted the carrier right were the bearing is pressed on.
i was jus leavin a stop sign, no romping or nothin just easy drivin and i herd a pop and the rear end started howling bad and i could feel the truck kinda walk sideways when i got on the gas. i thought it was a c clip but tore it apart today and it busted the carrier right were the bearing is pressed on.
05-10-2010, 06:46 PM
#99
TECH Fanatic
Thread Starter
iTrader: (8)
Join Date: Jun 2009
Location: pascagoula, mississippi
Posts: 1,037
Likes: 0
Received 1 Like
on
1 Post
i dont think they suck....i think the sorry piece of **** that sold it to me is junk....im sure you remember about that issue...if not just look up blownfogger540
