Slammed96

iTrader: (5)

Bringing this back up from the dead.
Updates on the truck: Added a 212/218 cam, 25% under drive pulley, E-fans, a Magnaflow muffler with under bed dump, Airaid CAI, and a good Nelson Tune. Looks wise, I got the wheels powder coated, lowered the truck 2/2, picked up a set of headlight covers and painted the tails to match, and threw an SS cluster with blue LED swap in up front. Now for the pictures
E-fans installed:
Idle after cam install, pre-tune. Yes the breather on the oil cap is now gone.
Dyno video last spring, put down 302 horses at the wheels.
On just a 2in rear drop
2/2 drop
Next in line: Performabuilt 4L60 and a Circle D 3200 stall. Should be installed sometime next week. Then just need to bring the rear down a bit more.

WICK3DxGATA

good looking truck. You still in college and are you still planning the turbo build?

Slammed96

iTrader: (5)

Thanks! Yeah I'm still in school, this is my last semester. I think the turbo build may go on the back burner for a bit. I picked up a 64 C10 I would like to do a 5.3/T56 swap on, and I need to have the truck as a daily. Would love to go turbo, but I'm quite happy where the truck is now, so it may stay so for a while.

2000chevysilverado

iTrader: (11)

Well you got more done to it then I ever did looks good now we will have to see which of us is the slowest

WICK3DxGATA

oh alright. im right there with you on wanting to do a turbo but i still have a couple years of school left. also i just picked up an 85 c10 not to long ago also picked up a 6.0 that im going to drop in it. looking forward to seeing some pics of the 64 if you have any.

Slammed96

iTrader: (5)

Thanks, I bet yours wins as soon as you get finished with it haha, right now I may have a slight edge though.

Deal! I'm going to start a build thread on it here before too long, although I havent really gotten anything done on it just yet. Waiting on more space.

WICK3DxGATA

im going to hopefully start the build thread on mine this summer. ive only got one picture of mine in my current build thread but nothings done to it yet. and i will forsure be tuned in to your build thread on it.

2000chevysilverado

iTrader: (11)

Yep u do beter trans a stall and a floppy cam. I wont get my cam done for atleast a month or two got all I need my tuner is to busy

Slammed96

iTrader: (5)

I'll have to watch your build once you get started! Mine is about the same, I need to frame swap and do rust repair and I don't want to pull it all apart if I have to move in a month or two.

Slammed96

iTrader: (5)

New trans and Circle D 3200 stall going in.
Best time so far with the new setup, right lane, spinning like a mother off the launch.