Next stage of the build
#1
FormerVendor
Thread Starter
iTrader: (4)
Join Date: Aug 2005
Posts: 1,940
Likes: 0
Received 0 Likes
on
0 Posts
Next stage of the build
NEXT ROUND OF TESTING
We will be installing an MP122HH at this time to run on the Drag Strip and Dyno in Vegas at the small meet scheduled there in November. we will have Dyno results after this round of modification to post up for everyone.
We will be starting on an LS2 8 Rib 8" Balancer and Pulley Setup for the TBSS. The company I will be dealing with is Innovators West for a complete pulley setup (thanks moregrip!). I will be send them all my pulley's for an 8" - 8 Rib Conversion.
http://www.innovatorswest.com/
We will be installing the CNC Stage 2 Ported L92 Heads from West Coast Cylinder Heads
http://www.proheads.com/
WCCH CNC Stage 2 Ported L92 Flow Data
http://www.proheads.com/WCCH%20L-92.html
We will be installing the Cam from LEP.
http://www.leadingedgeperformance.org/
We will be using the new L92 Harland Sharp Rockers
http://www.harlandsharp.com/
We will be installing an MP122HH at this time to run on the Drag Strip and Dyno in Vegas at the small meet scheduled there in November. we will have Dyno results after this round of modification to post up for everyone.
We will be starting on an LS2 8 Rib 8" Balancer and Pulley Setup for the TBSS. The company I will be dealing with is Innovators West for a complete pulley setup (thanks moregrip!). I will be send them all my pulley's for an 8" - 8 Rib Conversion.
http://www.innovatorswest.com/
We will be installing the CNC Stage 2 Ported L92 Heads from West Coast Cylinder Heads
http://www.proheads.com/
WCCH CNC Stage 2 Ported L92 Flow Data
http://www.proheads.com/WCCH%20L-92.html
We will be installing the Cam from LEP.
http://www.leadingedgeperformance.org/
We will be using the new L92 Harland Sharp Rockers
http://www.harlandsharp.com/
Last edited by leftcoast32; 09-04-2007 at 06:45 PM.
#2
FormerVendor
Thread Starter
iTrader: (4)
Join Date: Aug 2005
Posts: 1,940
Likes: 0
Received 0 Likes
on
0 Posts
Picked up the Stage 2 L92 heads from Richard and the crew at West Coast Cylinder Head this morning. It was great meeting everyone at WCCH!!!
Last edited by leftcoast32; 09-04-2007 at 09:57 PM.
#4
FormerVendor
iTrader: (3)
Join Date: May 2002
Location: Reseda, CA
Posts: 1,853
Likes: 0
Received 0 Likes
on
0 Posts
Great to meet you today Joe.
I'm looking forward to watching your project under way. You've got a really solid combination of parts and testing should reveal some intersting info on the combination of L92 heads and Maggie boosted engines.
I'll be sure to stay tuned
Richard
I'm looking forward to watching your project under way. You've got a really solid combination of parts and testing should reveal some intersting info on the combination of L92 heads and Maggie boosted engines.
I'll be sure to stay tuned
Richard
#7
FormerVendor
Thread Starter
iTrader: (4)
Join Date: Aug 2005
Posts: 1,940
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Richard@WCCH
Nice looking setup Joe.
Are these the regular production sets or pre production? Also any pricing you can share?
Richard
Are these the regular production sets or pre production? Also any pricing you can share?
Richard
Richard - These are preproduction, I will have to give them a call tomorrow. I will need to either clearance the heads or the rockers a little as they contact the head slightly. They didnt have a set of heads there to check the final fit.
Trending Topics
#9
FormerVendor
Thread Starter
iTrader: (4)
Join Date: Aug 2005
Posts: 1,940
Likes: 0
Received 0 Likes
on
0 Posts
The final ratio on the cam will be 224/230 .612/.612. I spoke with Harland Sharp this morning and we may need to change to a 1.8 ratio rather then the 1.7 due to clearance issues. I am sending a head and the rockers to them so they can work their magic on this setup. Once I get everything back I will be going up to see Richard again at WCCH. Thanks for the help Richard!
Last edited by leftcoast32; 09-14-2007 at 08:38 AM.