Ory the truck that shoulda been scrapped a long time ago
#1
Ory the truck that shoulda been scrapped a long time ago
A little back story on this build .
My dad bought the truck new December 12 1998 I was taken to the hospital while my mom was in labor my birthday is April 18 2000 I was then spawned and taken home in it . When my mom and dad split up he quit driving it for the most part in fall of 03 it had 100,000 miles at that time well fast forward to fall of 2016 I’m taking the bad engine (127,000 miles) out of it and swapping a new one in so I can have a first vehicle . Got it done hotrodded the hell out of it for about a year until that one got water in the oil and spun rods so It sat all summer until fall when I found another engine (current 06 5.3) and swapped it in . A few 4l60s later and here we are with the Huron speed kit and a gt45 turbo with the rest being eBay or Emusa parts . Somewhere along the way i spun out from a bad tire and hecked my cab and bed up pretty bad so that needs fixed but not important right now . So now that winded part is over time for the goodies 😁 the current setup I’m working on is a 2000 6.0 4l80 push button tcase for the truck . It’s got a rebuilt trans 28,000 miles and an aluminum head swapped long crank 6.0 I scored for 850 . The plan is ljms stage 2 turbo cam pac 1218 springs and possible rod bolts and head studs . The trans will receive the almighty transgo hd2 kit and a Jakes performance triple disc lockup converter . Now for the pics
My dad bought the truck new December 12 1998 I was taken to the hospital while my mom was in labor my birthday is April 18 2000 I was then spawned and taken home in it . When my mom and dad split up he quit driving it for the most part in fall of 03 it had 100,000 miles at that time well fast forward to fall of 2016 I’m taking the bad engine (127,000 miles) out of it and swapping a new one in so I can have a first vehicle . Got it done hotrodded the hell out of it for about a year until that one got water in the oil and spun rods so It sat all summer until fall when I found another engine (current 06 5.3) and swapped it in . A few 4l60s later and here we are with the Huron speed kit and a gt45 turbo with the rest being eBay or Emusa parts . Somewhere along the way i spun out from a bad tire and hecked my cab and bed up pretty bad so that needs fixed but not important right now . So now that winded part is over time for the goodies 😁 the current setup I’m working on is a 2000 6.0 4l80 push button tcase for the truck . It’s got a rebuilt trans 28,000 miles and an aluminum head swapped long crank 6.0 I scored for 850 . The plan is ljms stage 2 turbo cam pac 1218 springs and possible rod bolts and head studs . The trans will receive the almighty transgo hd2 kit and a Jakes performance triple disc lockup converter . Now for the pics
#4
Thank you ! It means the world to me I wouldn’t trade it in for a million dollars and no matter what anybody has said I’m determined to fix my “junk” and make it one bad *** street truck ! I’ve been torn between cams I like the summit 8706 turbo cam but it lacks much review the sloppy stage 2 will be good but not what I need I think and the btr or ljms might be another choice not exactly right .
#7
Ill have that conversion from 3 door to 4 on this thread since no one has ever posted one . expect this to be a 2 year + build
Trending Topics
#8
Cut the Whole left side of the doner truck off. Cut Through the floor, cowl, and the roof area. The inner structure is different between the 2 trucks.
#10
Agreed but its just not that same tincan of sheetmetal i fell in love with if i swap the bed then the cab .
Progress right ? All 6 square inches of it 🤦🏼*♂️ This 4 am stuff kicked my ars this week