PROJECTS GALLERY Vehicle builds | Engine Swaps | Conversions | Installation write ups |

Polished Vic Jr, Fast 4150, and 2/4 drop

Thread Tools
 
Search this Thread
 
Old 04-15-2009, 04:09 PM
  #71  
Hunt&Fisherator
iTrader: (15)
 
silver-mod-o's Avatar
 
Join Date: Nov 2005
Location: SETx
Posts: 14,314
Received 17 Likes on 14 Posts
Default

yes it does... I've only had it on the track once with the long bars but it did then... when it bottomed out, it unloaded the rear and still spun to a 2.1 60' The bars mainly stop wheel hop/axle wrap...
Old 04-15-2009, 04:12 PM
  #72  
Hunt&Fisherator
iTrader: (15)
 
silver-mod-o's Avatar
 
Join Date: Nov 2005
Location: SETx
Posts: 14,314
Received 17 Likes on 14 Posts
Default

Originally Posted by dirt track racer 81
bout all i got left to do is some wire loomin, hook up my break booster, tune it, and do some with my cold air intake.

get one like this and keep the old men at the track guessing LOL... have you seen the Woodhauler's setup???

http://www.streetsideauto.com/produc...NON&Reset=True
Old 04-15-2009, 04:57 PM
  #73  
Moderator
iTrader: (19)
 
TXsilverado's Avatar
 
Join Date: Jan 2005
Location: Humble Texas
Posts: 18,317
Received 223 Likes on 149 Posts
Default

i have a 3" drop shackle, 2" drop hanger and the overload removed with cal-tracs and mine never touches the frame...
Old 04-15-2009, 06:29 PM
  #74  
Fastest D1 Procharged Truck
iTrader: (30)
 
02_Orange_D1SC's Avatar
 
Join Date: Mar 2007
Location: mASSHOLE
Posts: 3,132
Likes: 0
Received 0 Likes on 0 Posts
Default

Originally Posted by TXsilverado
i have a 3" drop shackle, 2" drop hanger and the overload removed with cal-tracs and mine never touches the frame...
might have something to do with the shocks IMO
Old 04-18-2009, 06:52 PM
  #75  
TECH Senior Member
Thread Starter
iTrader: (45)
 
dirt track racer 81's Avatar
 
Join Date: Jun 2005
Location: Hennessey, Oklahoma
Posts: 9,439
Likes: 0
Received 11 Likes on 5 Posts
Default

got me a half assed cold air intake with a 3 in carb hat that was was layin around.. made some shims and got the rear end pointin down. put the overloads back on so im not bottoming it out that got old quick. i just wanted to get it to were its driveable. took it for a little drive and went half throttle a few times. defenantly needs some more fuel to it.. it got to 15 afr at 3800
Old 04-18-2009, 08:04 PM
  #76  
Resident Retard
iTrader: (31)
 
BlackGMC's Avatar
 
Join Date: Jan 2006
Location: Fort Worth - TX
Posts: 17,216
Received 20 Likes on 16 Posts
Default

Originally Posted by dirt track racer 81
got me a half assed cold air intake with a 3 in carb hat that was was layin around.. made some shims and got the rear end pointin down. put the overloads back on so im not bottoming it out that got old quick. i just wanted to get it to were its driveable. took it for a little drive and went half throttle a few times. defenantly needs some more fuel to it.. it got to 15 afr at 3800
Your not going to run a MAF are you? If not then why not get a old school round aircleaner and put it on instead of the carb hat?
Old 04-18-2009, 08:13 PM
  #77  
TECH Senior Member
Thread Starter
iTrader: (45)
 
dirt track racer 81's Avatar
 
Join Date: Jun 2005
Location: Hennessey, Oklahoma
Posts: 9,439
Likes: 0
Received 11 Likes on 5 Posts
Default

Originally Posted by BlackGMC
Your not going to run a MAF are you? If not then why not get a old school round aircleaner and put it on instead of the carb hat?
I ditched the maf years ago. im still not quite decided on what i going to do for an air cleaner. i rigged this stuff up from things that were layin around just to drive it.
it cant be very tall because of the clearance from the cowl... ill stick me one of these on http://store.summitracing.com/partde...5&autoview=sku
Old 05-21-2009, 01:14 PM
  #78  
Teching In
iTrader: (1)
 
soulefood's Avatar
 
Join Date: Apr 2009
Location: Elizabeth city, NC (for right now)
Posts: 27
Likes: 0
Received 0 Likes on 0 Posts
Default

hey what goes into taking the stock truck intake and TB off and replacing it with the vic jr and that throttle body? is it plug and play? is it a DBW throttle body? that looks cool as hell. what about the sensors on the stock intake? let me know... im interested in that!
Old 05-22-2009, 03:28 PM
  #79  
TECH Senior Member
Thread Starter
iTrader: (45)
 
dirt track racer 81's Avatar
 
Join Date: Jun 2005
Location: Hennessey, Oklahoma
Posts: 9,439
Likes: 0
Received 11 Likes on 5 Posts
Default

the throttle body is cable driven and has gm tps and iac sensors. the map is connected in the back. i did away with the evap stuff..
Old 05-24-2009, 08:58 AM
  #80  
Hunt&Fisherator
iTrader: (15)
 
silver-mod-o's Avatar
 
Join Date: Nov 2005
Location: SETx
Posts: 14,314
Received 17 Likes on 14 Posts
Default

Anything new happening on it? Get your fueling straightened out?


Quick Reply: Polished Vic Jr, Fast 4150, and 2/4 drop



All times are GMT -5. The time now is 06:50 AM.