Project "Blown HD" my 6/8 drop/shortblock/heads/cam/blower/tranny install
#1271
TECH Addict
Join Date: Jul 2005
Location: Stockton, CA
Posts: 2,060
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by moregrip
FINALLY, back inport! Project "Wiring Harness" begins tonight!
Mark
#1273
here are some before and mid-way pics. We are pretty much done this weekend. Next weekend we will preroute everything, adjust lengths as needed, and start the heat shrinking. As it stands now there will be only one harness that goes across the front of the engine that will feed various sensors and the rest will run down the drivers frame rail. It will SERIOUSLY clean-up the engine bay. Of course, it helps to have someone around who's done a few of these before thanks Joe!
stock wiring harness laid out:
all convoluted tubing and electrical tape removed, most re-routing complete:
stock wiring harness laid out:
all convoluted tubing and electrical tape removed, most re-routing complete:
Last edited by moregrip; 04-14-2007 at 05:54 PM.