Project "Blown HD" my 6/8 drop/shortblock/heads/cam/blower/tranny install
#1315
Notorious BIG
iTrader: (6)
Join Date: Aug 2005
Location: Pittsburgh, PA
Posts: 1,744
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by 1SlowHoe
They both use the same one huh? I was hoping the 122 had a little bigger one...
#1316
Originally Posted by Bill Reid
Damn grippy... wiring looks good. That looks like more than a one man one day project I still want to do this mod though...
Bill
Bill
#1317
Originally Posted by Richard@WCCH
This is very cool
Perhaps there's enough guys to justify making and selling harnesses like this? Great work here you guys. Thanks for detailing this job.
Richard
Perhaps there's enough guys to justify making and selling harnesses like this? Great work here you guys. Thanks for detailing this job.
Richard
maybe bro, but these things wouldn't be cheap at all, as it's VERY Labor intensive, not to mention the cost of Heat Shrink
Last edited by moregrip; 04-22-2007 at 10:46 PM.
#1318
there are companies that sell wire harness' just like grip is doing, one example is nelsonracing.com and another is hotrodlane.cc
hotrodlane.cc goes for 800 something
a little fyi
clint
hotrodlane.cc goes for 800 something
a little fyi
clint
#1319
TECH Senior Member
iTrader: (6)
Join Date: Jul 2005
Location: Decatur, AL
Posts: 5,257
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by moregrip
Thanks again Joe!
Here's what we got done:
after we marked every drop point and turn we started heat shrinking:
clips off, heat shrink on:
finished 3 sections today:
Here's what we got done:
after we marked every drop point and turn we started heat shrinking:
clips off, heat shrink on:
finished 3 sections today: