Bill Reid

iTrader: (14)

Nice work grippy. HE gonna go in front of the tranny cooler?

Bill

moregrip

iTrader: (8)

thanks Bill, the H/E'ers are going behind the lower valance

blown3qtr

Lookin' good Grippy!

Looks like you'll be done just in time to swap that 122 for a tvs.

moregrip

iTrader: (8)

that likely won't happen considering what polishing everything is costing me , after the 122 I'm calling this project done, going back to the classics

moregrip

iTrader: (8)

with the blower sent out for polish I am considering putting on a set of these valve covers.



I'll have a test fit in about 2 weeks to see if there is room under the hood for them
thoughts?

Richard@WCCH

iTrader: (3)

Spoolin is putting a set of them on his truck. They are the nicest Gen 3 valve covers I've seen. They'll even personalize them for you. You could have a message inscribed for Brian
Ryan @ Abear is a great guy to deal with. They'll compliment everything else you've done to your truck Grip. Also you'll also need to get yourself some early truck coils to use with them.

Richard

moregrip

iTrader: (8)

Very Cool, I've exchanged a few PM's with Ryan about them, I wasn't aware I couldn't use my existing coils.....hmm.....I do have one other option, the carbon fiber valve covers you see over on LS1Tech (decision)

Spoolin

iTrader: (8)

Since Richard mentioned Abear's work on my valve covers I thought I'd post them up in my engine thread so people can see them. Ryan was a great guy to deal with and I would have no hesitation to work with him again.
https://www.performancetrucks.net/fo...65#post3630065

moregrip

iTrader: (8)

wow, those look really awesome!

moregrip

iTrader: (8)

maybe something like this as well........