Project "Blown HD" my 6/8 drop/shortblock/heads/cam/blower/tranny install
#1904
Originally Posted by viciousknid
Come On Man. Put the camera down and pick up a wrench. Then pick up the camera again cuz i wana see this thing moving.
I think there's a good lesson to be learned here though.......mainly that things take longer than you anticipate.
#1905
Launching!
iTrader: (15)
Join Date: Apr 2007
Location: Fontana, CA
Posts: 250
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by moregrip
put together:
insert into space between damper flange and crank snout:
insert machined washer
secure with 180mm bolt
insert into space between damper flange and crank snout:
insert machined washer
secure with 180mm bolt
thanks
#1907
dexcool really seems to leave a lot of deposits in the cooling system, everywhere, the ID of the rubber hoses, overflow tanks, inside the radiator, pretty-much anywhere it flows. So far I have replaced everything besides the heater core and heater hoses. I will probably run this setup for a few miles and drain/strain the Evans coolant, then put it back in or replace it all-together........
makes me not want to put it into the intercooler system.....hmm
makes me not want to put it into the intercooler system.....hmm