Project "Blown HD" my 6/8 drop/shortblock/heads/cam/blower/tranny install
#2052
LS1 Tech Veteran
iTrader: (1)
Join Date: Oct 2003
Location: Wichita, Ks
Posts: 1,172
Likes: 0
Received 0 Likes
on
0 Posts
Grippy,
I'm in Washington, D.C. right now and I can't look at my factory manual, but I'm wondering where GM recommends prelubing the Gen III & IV Small Blocks. I think that I'd fill the oil filter directly first, then install the filter and pump about five quarts in where the plug is on left rear of the block (galley that goes up to the cam journals). Then after I ran it a bit, I'd top off the fracion of a quart according to the dip stick.
Do you (or anyone else) know where GM recommenda the prelube injection?
Steve
I'm in Washington, D.C. right now and I can't look at my factory manual, but I'm wondering where GM recommends prelubing the Gen III & IV Small Blocks. I think that I'd fill the oil filter directly first, then install the filter and pump about five quarts in where the plug is on left rear of the block (galley that goes up to the cam journals). Then after I ran it a bit, I'd top off the fracion of a quart according to the dip stick.
Do you (or anyone else) know where GM recommenda the prelube injection?
Steve
#2054
Grippy,
I'm in Washington, D.C. right now and I can't look at my factory manual, but I'm wondering where GM recommends prelubing the Gen III & IV Small Blocks. I think that I'd fill the oil filter directly first, then install the filter and pump about five quarts in where the plug is on left rear of the block (galley that goes up to the cam journals). Then after I ran it a bit, I'd top off the fracion of a quart according to the dip stick.
Do you (or anyone else) know where GM recommenda the prelube injection?
Steve
I'm in Washington, D.C. right now and I can't look at my factory manual, but I'm wondering where GM recommends prelubing the Gen III & IV Small Blocks. I think that I'd fill the oil filter directly first, then install the filter and pump about five quarts in where the plug is on left rear of the block (galley that goes up to the cam journals). Then after I ran it a bit, I'd top off the fracion of a quart according to the dip stick.
Do you (or anyone else) know where GM recommenda the prelube injection?
Steve
#2055
TECH Senior Member
Join Date: Jul 2006
Location: Somewhere around -199C
Posts: 7,023
Likes: 0
Received 0 Likes
on
0 Posts
#2057
TECH Senior Member
Join Date: Jul 2006
Location: Somewhere around -199C
Posts: 7,023
Likes: 0
Received 0 Likes
on
0 Posts
#2059
TECH Senior Member
Join Date: Jul 2006
Location: Somewhere around -199C
Posts: 7,023
Likes: 0
Received 0 Likes
on
0 Posts