Project "Blown HD" my 6/8 drop/shortblock/heads/cam/blower/tranny install
#2504
TECH Fanatic
Join Date: Oct 2005
Location: Woodstock Ontario Canada
Posts: 1,379
Likes: 0
Received 0 Likes
on
0 Posts
Wow, I just finished reading all 214 pages. I am ready for a nap, I'm exhausted.
Congrats Moregrip. Thats one heck of a setup you got there.
I cant wait for track times when you get back.
peace
Hog
Congrats Moregrip. Thats one heck of a setup you got there.
I cant wait for track times when you get back.
peace
Hog
#2505
blownerator
iTrader: (20)
My big install is just around the corner now, as some of you know, it's been almost 2 yrs in the making. I did my best, with the help of a few experts, in choosing a well thought out combination/package. Cam specs have changed 100 times, and I've had no less than 3 cams in my possession, all uninstalled.
So in keeping with my goals and engine parameters, the basic spec is as follows.
-Heads, WCCH 035 Stage 2's, 73.5cc, 2.02 1.57 (roughly 9.0-1 CR w/stock Head Gaskets)
-Cam, EDC(Flowtech), 224/236 .600/.590 @ 116LSA (powerband is 2000-6400 rpm on a 346-364ci engine)
-Connecting Rods, Stock w/LPE rod bolts (same as Katech)
-Rocker Arms, Stock
-Lifters, Stock
-Pushrods- Comp Cams 7.4
-Timing Chain- Comp Cams adjustable single roller ( I will be degreeing the Cam)
-Blower, Magnuson MP122HH @ 10lbs of boost
The exhaust system is already installed, SW 1 3/4, 3" collectors, Magnaflow 3" dual out the back.
On the DynoSim Software this combo is making between 750-850fwhp/fwtq, depending on boost levels, 10-14psi range. Peak TQ occurring @ 2000-2500rpm, Peak HP occurring @ 6000rpm (extending to 6500rpm). Obviously that's not a reality yet so I will be sure to post results as the combination is tested in the appropriate sections.
Anyone interested in progress pictures during the install?
So in keeping with my goals and engine parameters, the basic spec is as follows.
-Heads, WCCH 035 Stage 2's, 73.5cc, 2.02 1.57 (roughly 9.0-1 CR w/stock Head Gaskets)
-Cam, EDC(Flowtech), 224/236 .600/.590 @ 116LSA (powerband is 2000-6400 rpm on a 346-364ci engine)
-Connecting Rods, Stock w/LPE rod bolts (same as Katech)
-Rocker Arms, Stock
-Lifters, Stock
-Pushrods- Comp Cams 7.4
-Timing Chain- Comp Cams adjustable single roller ( I will be degreeing the Cam)
-Blower, Magnuson MP122HH @ 10lbs of boost
The exhaust system is already installed, SW 1 3/4, 3" collectors, Magnaflow 3" dual out the back.
On the DynoSim Software this combo is making between 750-850fwhp/fwtq, depending on boost levels, 10-14psi range. Peak TQ occurring @ 2000-2500rpm, Peak HP occurring @ 6000rpm (extending to 6500rpm). Obviously that's not a reality yet so I will be sure to post results as the combination is tested in the appropriate sections.
Anyone interested in progress pictures during the install?
and to think, this is how it started.
#2506
On The Tree
Join Date: Dec 2006
Location: So. calif.
Posts: 158
Likes: 0
Received 0 Likes
on
0 Posts
Congrats Devin,Gez I thought the the cylinder walls were gonna rust.The engine sounds good. Now get it out of the garage and get it tuned before the tires dry rot.LOL Rex.....