Project "Blown HD" my 6/8 drop/shortblock/heads/cam/blower/tranny install
11-28-2006, 04:03 PM
#391
You do realize that by pulling the motor you are killing two birds with one stone. Not only is it MUCH easier to do all the work on the motor(have you ever degreed a cam in the truck? not fun IMO), but oyu can also put the tc in too without having to pull the trans. Food for thought.
11-28-2006, 04:29 PM
#393
TECH Senior Member
iTrader: (6)
Join Date: Jul 2005
Location: Decatur, AL
Posts: 5,257
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by 1slow01Z71
You do realize that by pulling the motor you are killing two birds with one stone. Not only is it MUCH easier to do all the work on the motor(have you ever degreed a cam in the truck? not fun IMO), but oyu can also put the tc in too without having to pull the trans. Food for thought.
11-28-2006, 04:41 PM
#394
Originally Posted by onebadrubi
He is pulling the tranny to have it rebuilt anyways.
Like Turbo said if you got a hoist pull it, your back will thank you.
11-28-2006, 05:41 PM
#396
Adkoonerstrator
iTrader: (4)
Join Date: Nov 2001
Location: Deep in the seedy underworld of Koonerville
Posts: 21,436
Likes: 0
Received 3 Likes
on
2 Posts
Originally Posted by 1slow01Z71
Never seen where he posted that he was having it rebuilt, IMO for the power he is going to be making it is wasted money, plenty of people have taken a stock 80e past 600rwhp not to mention his has a shift kit in it.
Like Turbo said if you got a hoist pull it, your back will thank you.
Like Turbo said if you got a hoist pull it, your back will thank you.
11-28-2006, 05:45 PM
#397
Originally Posted by XLR8NSS
I believe he might have been having some small issues with the tranny already so he wanted to get a good trans in it before adding anymore power.
11-28-2006, 05:51 PM
#399
TECH Fanatic
Join Date: Dec 2005
Location: arkansas
Posts: 1,932
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by 1slow01Z71
I remember some post by him in the drivetrain section now that I think of it. Oh well either way my back hurt for a couple of days after helping turbogibbs with his cam swap and doing my lifter/cam swap in my truck and Im a younger fella. Either way Grip there better be some pics of it torn all the way down when I check back at midnight before I go to work
Hvant both of yall posted about were is the beer? The back problem wouldnt be from to many
and not remember what fully happened? HAHAH 
I hate mine, that's for sure.