Project JUNKER
06-16-2011, 11:22 AM
#31
TECH Fanatic
iTrader: (1)
Join Date: Nov 2004
Location: Wisconsin
Posts: 1,331
Likes: 0
Received 0 Likes
on
0 Posts
NEAT!
Here is my 50. Basically how I bought it last aside from a bunch of mechanical work and a polish. Does 60mph with the 235 inline 6. Will keep it for now till I blow it up or get the second frame I have a roller/runner.
I'm going to put C4 Corvette front and rear suspension under it and something fuel injected under the hood. Either a 5.3L or a 4.2L inline 6 out out of a trailblazer.
Here is my 50. Basically how I bought it last aside from a bunch of mechanical work and a polish. Does 60mph with the 235 inline 6. Will keep it for now till I blow it up or get the second frame I have a roller/runner.
I'm going to put C4 Corvette front and rear suspension under it and something fuel injected under the hood. Either a 5.3L or a 4.2L inline 6 out out of a trailblazer.
09-09-2011, 09:10 PM
#40
9 Second Club
Thread Starter
iTrader: (30)
Join Date: Apr 2004
Posts: 1,407
Likes: 0
Received 0 Likes
on
0 Posts
Thanks! My wife would never let this go, she loves it because we just get in and go to car shows. No washing or waxing ever!
We dyno'd it at a car show last weekend and got 550/550 tq/hp. we could only hit 185 kpa on the rollers. We hit 210 plus kpa on the street. I guess the dyno didn't load it properly? We run off the 15# WG spring only, no controller.
We dyno'd it at a car show last weekend and got 550/550 tq/hp. we could only hit 185 kpa on the rollers. We hit 210 plus kpa on the street. I guess the dyno didn't load it properly? We run off the 15# WG spring only, no controller.