RCLB GMT-900. tvs1900, 4l80e, stall, cam, exhaust
07-14-2011 | 10:13 PM
#31
Thread Starter
TECH Fanatic
iTrader: (14)
Joined: Jul 2008
Posts: 1,103
Likes: 0
From: flemington nj
Got it fired up tonight for first run. Everything looked good! This 212/222 115 cam has a decent little lope to it. Next time I have it running I'll take a video and post it up.
07-17-2011 | 12:54 PM
#35
TECH Enthusiast
Joined: Oct 2010
Posts: 727
Likes: 1
From: FL
this is the 2nd start up
http://www.youtube.com/watch?v=LB2jMXY9ER8
http://www.youtube.com/watch?v=LB2jMXY9ER8
07-17-2011 | 06:37 PM
#37
Thread Starter
TECH Fanatic
iTrader: (14)
Joined: Jul 2008
Posts: 1,103
Likes: 0
From: flemington nj
im really surprised it sounds like it does. thought it would idle smoother not that i want that. i told pat g i want it to lope. some of it will prob go away once the tune is locked in.
i took it out for a spin today and it wants to go when it shifts second. gets real loud and wants to just pull even though im not giving it much gas at all. threw a check engine light but autocal doesnt pick anything up... this was more or less just a drive to make sure all is good. i wont really be driving it until everything else is done.
it actually doesnt have any jets in there now because the ones i have are for a 100 shot. i gotta order 35hp shot jets from hsw
i took it out for a spin today and it wants to go when it shifts second. gets real loud and wants to just pull even though im not giving it much gas at all. threw a check engine light but autocal doesnt pick anything up... this was more or less just a drive to make sure all is good. i wont really be driving it until everything else is done.
it actually doesnt have any jets in there now because the ones i have are for a 100 shot. i gotta order 35hp shot jets from hsw
07-29-2011 | 08:52 PM
#38
Thread Starter
TECH Fanatic
iTrader: (14)
Joined: Jul 2008
Posts: 1,103
Likes: 0
From: flemington nj
i posted this up in a new thread in FI but it goes along with this project so here ya go
i wasnt going to spend 400 on a hd tensioner setup so i went and got the actual gates tensioner for 100 bucks and made my own bracket. let me know what you guys think. this is more or less a prototype piece. i wasnt going to go crazy with geometry and programming it and it not fit or something dumb. all in all i got 3hrs into it
i wasnt going to spend 400 on a hd tensioner setup so i went and got the actual gates tensioner for 100 bucks and made my own bracket. let me know what you guys think. this is more or less a prototype piece. i wasnt going to go crazy with geometry and programming it and it not fit or something dumb. all in all i got 3hrs into it
07-29-2011 | 10:00 PM
#40
Thread Starter
TECH Fanatic
iTrader: (14)
Joined: Jul 2008
Posts: 1,103
Likes: 0
From: flemington nj
This machine work is nothing compared to my real work but I can't really show that stuff. This part has an hour of programming and maybe 15 min of run time. I got things with nearly a month of programming and 10 hrs to make in a very fast cnc machine
Thank you though
btw I got a big picture of your avatar pic on the wall
Thank you though
btw I got a big picture of your avatar pic on the wall