RCLB GMT-900. tvs1900, 4l80e, stall, cam, exhaust
12-04-2011, 01:11 PM
#81
TECH Fanatic
Thread Starter
iTrader: (14)
Join Date: Jul 2008
Location: flemington nj
Posts: 1,103
Likes: 0
Received 0 Likes
on
0 Posts
12-04-2011, 01:21 PM
#82
TECH Fanatic
Thread Starter
iTrader: (14)
Join Date: Jul 2008
Location: flemington nj
Posts: 1,103
Likes: 0
Received 0 Likes
on
0 Posts
the track results are in, as expected and a bit better then expected really. as i expected it spun bad, no more then half throttle until it was into second gear some. but i did tree a real nice c6 z06. he was runnin me down some but i got him.
60ft 2.33
1/8 8.66 @ 90.2
1/4 12.98 @ 113.4
i didnt think it would trap that high, i was having problems with the meth, it wont stay on for more then a couple seconds, but afr was a bit fat and it was cold out so i wasnt worried about it. its about mid to high 10's afr we could go leaner but he wants me to do a couple things first like switch to 2 bar map and add iat into the manifold. i think for sure on slicks i can go 11's. denmah was there with his turbo 4.8 but i didnt get to talk to him at all, i wanted to see if i could throw him some cash and use his slicks for a pass but ill just wait to get my own.
60ft 2.33
1/8 8.66 @ 90.2
1/4 12.98 @ 113.4
i didnt think it would trap that high, i was having problems with the meth, it wont stay on for more then a couple seconds, but afr was a bit fat and it was cold out so i wasnt worried about it. its about mid to high 10's afr we could go leaner but he wants me to do a couple things first like switch to 2 bar map and add iat into the manifold. i think for sure on slicks i can go 11's. denmah was there with his turbo 4.8 but i didnt get to talk to him at all, i wanted to see if i could throw him some cash and use his slicks for a pass but ill just wait to get my own.
12-10-2011, 01:38 PM
#85
TECH Fanatic
Thread Starter
iTrader: (14)
Join Date: Jul 2008
Location: flemington nj
Posts: 1,103
Likes: 0
Received 0 Likes
on
0 Posts
made it back to the track on the new hoosiers and had 5 back to back passes in the 11.8x best being 11.84 @ 114.3 with a 1.67 60ft. couldnt be any more happy! not bad for a baby motor under a little pressure
12-10-2011, 02:10 PM
#87
TECH Fanatic
Thread Starter
iTrader: (14)
Join Date: Jul 2008
Location: flemington nj
Posts: 1,103
Likes: 0
Received 0 Likes
on
0 Posts
ohhh i already thought about it! no nitrous. maybe it will get done before next year, maybe ill just enjoy it as is because id be making like 16#'s then, might be a bit much with spray on top of that. stock headgaskets and tty bolts would be begging for mercy
12-11-2011, 07:19 PM
#90
On The Tree
iTrader: (5)
Join Date: Sep 2011
Location: Mantua, Ohio
Posts: 104
Likes: 0
Received 0 Likes
on
0 Posts
Very cool! I just read this whole thread front to present and I'm impressed! I think it's cool that it's a long bed cause you never see that and I'm trying to do a LB myself. This thread is a good example one reason I love this obsession. I just learned so much valuable information from this, and i love when theres pics and good updates. I can't wait to see where you go from here. Very nice numbers!