Some pics of my pro street dodge projo
01-17-2009, 04:17 PM
#1
Baltimore Whore
Thread Starter
iTrader: (95)
Join Date: Apr 2004
Location: In a van DOWN BY THE RIVER
Posts: 16,820
Likes: 0
Received 2 Likes
on
2 Posts
Some pics of my pro street dodge projo
Welp among a few others, pops and me decided to build a pro street car. These pics are from last year, we are at the point of waitinf for the painter.. car is a 75 dodge dart swinger, with none other then good old chevy power
motor is a 386 inch stroker. Howards fg crank, lunati rods, ross blower pistons, brody track 1 heads.. On top is a super chiller, a blower shop 8-71. Trans is a ATI built 400 turbo, with a trans brake, 3500 converter. Out back is a 9 inch, with 4:30 ring, pinion, along with a auburn unit, were might change to mono springs, cal tracs are in mind now. Who knows could change to a 4 link..Motor should be good for 900+ hp..We set the motor back almost 10 inches, the front plugs are behind the front axles.. Should make for a very interesting street car. car has full inner and out wheel tubs. Going to paint it the orig white, with the factory vinyl top. It is on a back burner now, since we have the boat stuff going on, but is well on its way... Thanks for looking. Don't mind the pics, they have been scanned...
[IMG]
[/IMG]
[IMG]
[/IMG]
[IMG]
[/IMG]
[IMG]
[/IMG]
[IMG]
[/IMG]
[IMG]
[/IMG]
[IMG]
[/IMG]
[IMG]
[/IMG]
motor is a 386 inch stroker. Howards fg crank, lunati rods, ross blower pistons, brody track 1 heads.. On top is a super chiller, a blower shop 8-71. Trans is a ATI built 400 turbo, with a trans brake, 3500 converter. Out back is a 9 inch, with 4:30 ring, pinion, along with a auburn unit, were might change to mono springs, cal tracs are in mind now. Who knows could change to a 4 link..Motor should be good for 900+ hp..We set the motor back almost 10 inches, the front plugs are behind the front axles.. Should make for a very interesting street car. car has full inner and out wheel tubs. Going to paint it the orig white, with the factory vinyl top. It is on a back burner now, since we have the boat stuff going on, but is well on its way... Thanks for looking. Don't mind the pics, they have been scanned...[IMG]
[/IMG][IMG]
[/IMG][IMG]
[/IMG][IMG]
[/IMG][IMG]
[/IMG][IMG]
[/IMG][IMG]
[/IMG][IMG]
[/IMG]
Last edited by Mangled03gmc; 06-02-2010 at 01:11 PM.
