03' steering wheel swap into a 00'
#1
Teching In
Thread Starter
Join Date: Aug 2007
Location: Carthage,TN
Posts: 22
Likes: 0
Received 0 Likes
on
0 Posts
03' steering wheel swap into a 00'
How can you modify a 03' wheel to fit in a 00' truck.??? the 03 wheel is splined diff. I was wondering if anybody has tried it or has any ideas. The most obvious way is to just swap the whole column out but that would be a PITA, I could also bore the hole to fit but IDK how I would secure the wheel to keep it from free spinning.... that would be pointless if if wouldn't stay secure
let the thought process begin.. surely someone has done it or made an attempt
let the thought process begin.. surely someone has done it or made an attempt
Last edited by Shahnp1; 04-26-2008 at 07:37 PM.
#3
Teching In
Thread Starter
Join Date: Aug 2007
Location: Carthage,TN
Posts: 22
Likes: 0
Received 0 Likes
on
0 Posts
Trending Topics
#9
Teching In
Thread Starter
Join Date: Aug 2007
Location: Carthage,TN
Posts: 22
Likes: 0
Received 0 Likes
on
0 Posts
1+ on the machine shop idea and I there might be a way to pin it but it would have to be done from the back so i'm not real sure how to get that to work but i'll look into
#10
TECH Apprentice
Join Date: Jan 2008
Location: Fresno, CA
Posts: 324
Likes: 0
Received 0 Likes
on
0 Posts
You could have the splines machined out of the steering wheel and have a keyway or two cut, you will have to cut a keyway into the shaft, but you might be able to dremel that yourself. Its not easy, but it can be done.