Detail pics - Dylan from adams polishes
10-05-2009, 02:23 AM
#1
Blown 427 LSX
Thread Starter
iTrader: (13)
Join Date: Oct 2006
Location: California
Posts: 1,471
Likes: 0
Received 0 Likes
on
0 Posts
Detail pics - Dylan from adams polishes
So saturday Dylan from adams polishes came up to detail my truck with his buddy anthony...
We started at 9am sat morning and went until dark...
here is the truck before we started...
First step - clean the wheels
Next they have a bitchen soap/foam machine that they cover the entire truck in soap/foam...
Before they touch the paint, the wash off all of the soap, then reapply another application of soap/foam and then proceed to washing the truck with adams wash pads
Then they rinse it off, the dry it with adams drying cloths, after which the blow it dry with a leaf blower (my wet/dry vac from sears doubles as a leaf blower - highly recommended!)
The detail products!
Inspecting the NEW paint and all of the swirls -
Orange pad with achine polish... hard at work dylan!
Time for the fine polishing... white pad with a SMALL amount of product! I learned that a LITTLE product goes a long way.
Inspecting the results - this is BEFORE any wax!! No more swirls, yaaaaa
time for some VRT in the engine bay
two coats of Americana wax - this stuff is insane!
the powerplant - forged 427 LSX with a TVS 2300 SC.
I could not get final pics because it was already dark out, and today there were several CLOSE fires in the area so I left her inside - I will get some final pics on tuesday.
Big thanks to Dylan and Anthony, two very good guys who worked their asses off. I highly recommend them - IF you can get an appointment!!
We started at 9am sat morning and went until dark...
here is the truck before we started...
First step - clean the wheels
Next they have a bitchen soap/foam machine that they cover the entire truck in soap/foam...
Before they touch the paint, the wash off all of the soap, then reapply another application of soap/foam and then proceed to washing the truck with adams wash pads
Then they rinse it off, the dry it with adams drying cloths, after which the blow it dry with a leaf blower (my wet/dry vac from sears doubles as a leaf blower - highly recommended!)
The detail products!
Inspecting the NEW paint and all of the swirls -
Orange pad with achine polish... hard at work dylan!
Time for the fine polishing... white pad with a SMALL amount of product! I learned that a LITTLE product goes a long way.
Inspecting the results - this is BEFORE any wax!! No more swirls, yaaaaa
time for some VRT in the engine bay
two coats of Americana wax - this stuff is insane!
the powerplant - forged 427 LSX with a TVS 2300 SC.
I could not get final pics because it was already dark out, and today there were several CLOSE fires in the area so I left her inside - I will get some final pics on tuesday.
Big thanks to Dylan and Anthony, two very good guys who worked their asses off. I highly recommend them - IF you can get an appointment!!
Last edited by usabodyguard; 10-05-2009 at 02:38 AM.
10-05-2009, 09:31 AM
#5
Formerly 08_gmc_slt-08/20/2010
iTrader: (4)
Join Date: Jul 2005
Location: Sherwood, AR
Posts: 588
Likes: 0
Received 0 Likes
on
0 Posts
http://www.griotsgarage.com/product/...rrivals&page=1
