Drag wheels/tires - Let's see them!
#1
Drag wheels/tires - Let's see them!
As the title says, let's see your track setups! I'm looking for a drag setup for my truck and can't decide on what I should go with. I thought about using a stock chevy 16 inch wheel and MT ET 28x11.50/16. I would like to drive to the track but the closest one is 1 & 1/2 hrs away so it would probably use too much tread driving that far. Would it be better to just swap tires out at the track? Thanks
#3
TECH Addict
iTrader: (7)
Here's mine. I do drive to the track like that sometimes but its only 45 min away.......but on the drag setup I'm too low and drag more than the Vettes
I'm running 255/50 16 MT ET Street radials on 16x8 Ultra wheels in the rear and 215/60's on the stock front wheels.
I'm running 255/50 16 MT ET Street radials on 16x8 Ultra wheels in the rear and 215/60's on the stock front wheels.
Last edited by StrokerAce03; 06-10-2010 at 09:59 PM.
#4
TECH Fanatic
iTrader: (8)
Join Date: Jun 2009
Location: pascagoula, mississippi
Posts: 1,037
Likes: 0
Received 1 Like
on
1 Post
im going with the same setup as StrokerAce.....but stock 16s in back with the MT et street radial 255/50r16 and my SSS 20's up front until i find some skinny 17s to clear my brakes and spindles.