Few Nitrous install pics, I'm getting started :)
#1
Baltimore Whore
Thread Starter
iTrader: (95)
Join Date: Apr 2004
Location: In a van DOWN BY THE RIVER
Posts: 16,820
Likes: 0
Received 2 Likes
on
2 Posts
Few Nitrous install pics, I'm getting started :)
Ok well looking at some of your pic, I decided to mount the bottle behind the console for now, maybe move it to the bed later, buy ehhhh... So I got kit today and started the instal.. I got the sol's mounted, the buttons, bottle mounted in the truck. This weekend ima try to have it all wired up.. Also I am going to trim that bracket under the sol, that looks like ***, but this is kinda a mock up. Also dunno why the switches look crooked they are right on time. Just thought I would share.... This is a dry kit to start but in the near future I am going to convert to a wet shot. Kinda wanted to keep the switches hidden, so I though that would work. I am going to try and hide the lines, sol's also... Thoughts ops on this
John
John
#4
Baltimore Whore
Thread Starter
iTrader: (95)
Join Date: Apr 2004
Location: In a van DOWN BY THE RIVER
Posts: 16,820
Likes: 0
Received 2 Likes
on
2 Posts
Thanks TREV,00Sil. For starts I am thinking that a 100 shot will be par for course, once the wet shot goes in, poss a 125.. That should help in the 1320
John
John
Last edited by Mangled03gmc; 05-14-2008 at 09:12 PM.
#5
Moderately Differentiated
iTrader: (4)
If you are hooking up with us June 1st, you better have that blown down tube installed. You'll here my story of Capital Raceway pulling me off the damn tree. LMAO
You tune yourself John? Or are you okay with the 100 going through the MAF and letting the PCM make the adjustments from there?
You tune yourself John? Or are you okay with the 100 going through the MAF and letting the PCM make the adjustments from there?
#7
Baltimore Whore
Thread Starter
iTrader: (95)
Join Date: Apr 2004
Location: In a van DOWN BY THE RIVER
Posts: 16,820
Likes: 0
Received 2 Likes
on
2 Posts
If you are hooking up with us June 1st, you better have that blown down tube installed. You'll here my story of Capital Raceway pulling me off the damn tree. LMAO
You tune yourself John? Or are you okay with the 100 going through the MAF and letting the PCM make the adjustments from there?
You tune yourself John? Or are you okay with the 100 going through the MAF and letting the PCM make the adjustments from there?
Ok I have to be missing something here, blown down tube.
As far as the tune goes I am going to get a tune from DC JUSTIN, by mail, till I can go get a dyno or street tune done by him or f-bod cen.
John
Trending Topics
#8
2nd fastest 5.3 ECSB
iTrader: (14)
Blow down tube will mount on the valves burst disc to vent gas down and out of the cab thru the floor (or whatever) to the outside so you aren't gassed while driving.....NHRA regs require one when the bottle is mounted in the cab..
See the aluminum tube going up and then down and thru the floor?
See the aluminum tube going up and then down and thru the floor?
#9
Baltimore Whore
Thread Starter
iTrader: (95)
Join Date: Apr 2004
Location: In a van DOWN BY THE RIVER
Posts: 16,820
Likes: 0
Received 2 Likes
on
2 Posts
Blow down tube will mount on the valves burst disc to vent gas down and out of the cab thru the floor (or whatever) to the outside so you aren't gassed while driving.....NHRA regs require one when the bottle is mounted in the cab..
See the aluminum tube going up and then down and thru the floor?
See the aluminum tube going up and then down and thru the floor?
John