glassworks unlimited fenders
#26
TECH Fanatic
Thread Starter
iTrader: (20)
Join Date: Jan 2008
Location: morristown/newport,tn
Posts: 1,059
Likes: 0
Received 0 Likes
on
0 Posts
i need a camera these are from my phone its not installed yet but thats a test fit still gotta trim the fender support a little more but its gettin there
Last edited by jkwalkercchs; 07-04-2008 at 02:03 PM.
#28
TECH Fanatic
Thread Starter
iTrader: (20)
Join Date: Jan 2008
Location: morristown/newport,tn
Posts: 1,059
Likes: 0
Received 0 Likes
on
0 Posts
im going to i had to go pic my little brother up from school
u mean alot of the modifications i had to do lol
and those attachment points i had to beat cut and grind u mean
u mean alot of the modifications i had to do lol
and those attachment points i had to beat cut and grind u mean
#29
TECH Fanatic
Thread Starter
iTrader: (20)
Join Date: Jan 2008
Location: morristown/newport,tn
Posts: 1,059
Likes: 0
Received 0 Likes
on
0 Posts
this is the lower rear fender moun tabe it has been beat back and grinded flat also cut the top of because it was getting in the way of the fender
this is the upper rear tab it was beaten back a considerable amount
enough to get a gap this big when original fender support is mounted....you can also the notch made in the mount bracket so the fiberglass fender would clear it
this is all thats left of the original fender....you could actually drive with just this part and it would be structually safe
this is what all was removed to get that inner support to what it is now
this is the upper rear tab it was beaten back a considerable amount
enough to get a gap this big when original fender support is mounted....you can also the notch made in the mount bracket so the fiberglass fender would clear it
this is all thats left of the original fender....you could actually drive with just this part and it would be structually safe
this is what all was removed to get that inner support to what it is now