Lowered 3/4 with the 24's......
#1
Launching!
Thread Starter
iTrader: (1)
Join Date: Dec 2003
Location: Scarborough, Maine
Posts: 252
Likes: 0
Received 0 Likes
on
0 Posts
Lowered 3/4 with the 24's......
Well this afternoon cyazo6 and myself did the Mcgaughys lowering kit to my truck. We used a friends garage that has a lift in it so it made the job that much easier. I had already put on the shackles so that was already done along with 3 turns on the torsion bars. So today we did the spindles and removed the blocks from the rear and used some GM 2 wheel drive U-bolts. It took us about 3 hours or so to do the whole job, not to bad considering she looks so much better at this ride height.
Anyway I want to thank Fred (cyazo6) again for the help.. he did most of the work..lol for the hand today.
So lets get on to the pics............ ;-)
Bill
Anyway I want to thank Fred (cyazo6) again for the help.. he did most of the work..lol for the hand today.
So lets get on to the pics............ ;-)
Bill