stepside bed swap
#22
TECH Resident
iTrader: (2)
Join Date: Jan 2006
Location: Minnesota
Posts: 799
Likes: 0
Received 0 Likes
on
0 Posts
When i bought my truck new it was a stepside after bagging the truck and breaking two drivers side box side on the stepside, i located a new box off of an 05 gmc ECSB i was able to get the box for a thousand. But the things that are different is the filler neck has to be cut and extened, you will need to get fleetside taillighs with harness's, the bumper is different on the two models i molded a pan in,other than that all the mounting locations are the same. i have never had a problem removing a box with two people.
#23
Originally Posted by 03lowriderss
When i bought my truck new it was a stepside after bagging the truck and breaking two drivers side box side on the stepside, i located a new box off of an 05 gmc ECSB i was able to get the box for a thousand. But the things that are different is the filler neck has to be cut and extened, you will need to get fleetside taillighs with harness's, the bumper is different on the two models i molded a pan in,other than that all the mounting locations are the same. i have never had a problem removing a box with two people.
im going from a fleetside to a stepside
Thread
Thread Starter
Forum
Replies
Last Post
4EyedTurd1
GMT 800 & Older GM General Discussion
1
08-08-2015 10:09 PM
FlowmasterMufflers
Dodge Engine & Exhaust Performance
0
07-09-2015 11:35 AM