Valve Covers and Coil Relocation
#1
FormerVendor
Thread Starter
iTrader: (4)
Join Date: Aug 2005
Posts: 1,940
Likes: 0
Received 0 Likes
on
0 Posts
Valve Covers and Coil Relocation
I have been working with a company on these valve covers and coil relocation brackets for a little while. This is what we came up with and he produced them on his CNC machine. The Valve covers are 2" tall so I can use shaft mounted rockers later without having to do valve cover spacers. The valve covers have a billet screw in oil fill. The coil relocation brackets mount the coils right next to each other to save space and help with mounting. I plan to mount the coils on the upper a-frame towers directly across from the plugs. This will make it possible to still use the stock length plug wires. All of the mounting hardware is stainless steel, I will still need to polish everything once it gets here this week. I am also working with Allen Nelson on an engine wiring harness to clean the bulk of wires off the top of the engine.
#3
FormerVendor
Thread Starter
iTrader: (4)
Join Date: Aug 2005
Posts: 1,940
Likes: 0
Received 0 Likes
on
0 Posts
They are supposed to send me a price sheet for them today. He has the CNC program set so they shouldn't take as long to produce now. This first set was a little pricey to say the least. The coil relocation brackets will need to be drilled for the vehicle as they have about 3 or 4 different types of coils so far. These are for the LS2.