tb8100

iTrader: (1)

Looking at a set of 285/60/18 Terra Grapplers and am curious if they would fit without rubbing... Thanks.

TXsilverado

iTrader: (19)

you shouldnt have any problems running that size tire. i ran 30" tires on a 3/4 drop 1500.

beastmode

iTrader: (52)

yes they should be fine, my buddy is runnin 285/75/16s (32.8s) on his stock with the tbars cranked up a lil, the hds have a built in 2" body lift on the frame due to the allison tranny being bigger so that way they could keep the tranny tunnel the same, so they sit bout 2"s higher than a halfton and half tons come stock wit liek 29s, 31s should definitely fit, i cranked my torsion bars up on my half ton and ran 33s

Pjstucn

i promise they wont rub. I have 30s on my 1500 right now and the 2500s are higher, so no worries.

nightrunner

iTrader: (4)

my dad has 285/75R16 on his now completely stock and they only rub a little at full lock in the front cranking the tbars wil cure that

BlackLM7

Wow...those tires must have a serious sidewall. They are almost 33" in diameter!

jblack6527

a buddy of mine has a 05 d-max truck with 285/75/16's and they rub just a little at full lock, not much though

m7 rocket

Mine has t-bars cranked up, and 265's have alot of clearance. My cousins is same lift, 285/16's and he had to trim a smidge off front bumper. Sometimes the offset of the wheel can interfere here too, so don't offset to much. Also gets close to mudflap if you have any, gm style flaps fit okay, some heavy rubber ones rub at full lock. I would not worry about any of these issues, as I will have them on mine soon too.
Later.

Beastofa327

I've seen 305/70/16's (32or 33) on a 2500 and my Father In-Law is runnin the same size on his 3500 Ram.

getchusum99

iTrader: (1)

they will fit. and not all hd's have duramax's