When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Also, what gasket is used on the TVS2300 lower plate that you ported? if i tear mine apart, where do i get a new gasket? I like the idea of the porting!
I bought the catted Y pipe version. I just used the Maggie intake gasket and ported the intake to the gasket... I removed a ton of aluminum!
I've been doing a few small projects on the truck.... I installed a wireless charger for my Galaxy S7 in my center console lid, finished wiring all 3 of my gauges, and placed a $400 order for the last few parts and upgrades for my TVS2300. I ordered a Magnuson HD tensioner and all the gaskets and seals to reassemble my blower.. I also lowered the rear of my truck another inch to set my stance at 2/5.
Wired up the HX pump tonight. I decided to hide the relay and fuse under the engine compartment fuse box instead of mounting it on the inner fender like Magnuson says to do it... I am going for a factory TVS2300 that GM should have done with these trucks!
05-14-2016, 12:47 AM
