When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
So the headers are on. Couldn't fit the cut outs in there so I'm going to do a single one at the y pipe. All the parts go on this Saturday. Getting the tune done march 17th by Matt Shue. Going to try and have the new cut out in and what not before. We'll see.
So the headers are on. Couldn't fit the cut outs in there so I'm going to do a single one at the y pipe. All the parts go on this Saturday. Getting the tune done march 17th by Matt Shue. Going to try and have the new cut out in and what not before. We'll see.
smart move. One large single cutout will be cleaner, easier and still allow you to make great power
So by the tip of our heads we got everything done on the truck and installed. Barely had everything done score we towed it to the tuner. Got to the Dyno and the truck was to big for the awd Dyno.... so that's impossible to find my actual numbers at this point.
Matt did a street tune and it is awesome! He did a full tune on my trans as well, the trans feels like a completely different rig. Matt knows the inside and outs of these 6l80's. So all motor the truck is awesome. We weren't able to do the nitrous tune because my engine was struggling to get air. The stock intake (that everybody swears was golden) was suffocating the engine and the y pipe I had done by a local shop ended up restricting the heck out of the engine. So I'm going to get some more air flowing and order a 3 inch y pipe and a volant intake for it. Debating a ported throttle body and a ported intake manifold but not sure on that just yet. Truck runs awesome. Is super fun with the wireless cut out!
I cant seem to insert a video but check it out on Facebook (joe darr) or instagram jdarr33
will update if I can find a Dyno to work and when I get some more parts ordered
03-08-2017 | 09:24 PM
