Stainless Steel catch can, cheap
#3
TECH Apprentice
Thread Starter
It has been 5 years on 4.8LS Magnuson TVS1900 at 11 PSI.
Catch can functions as intended.
Install is simply plumbed with 3/8" Fuel/Evap hose between Driver side rocker cover PCV port and intake manifold.
Bottle is upside down, removing cap nets a consistent ounce and a half of clean, wet oilly emulsion at each 5000 mile oil change interval.
Catch can functions as intended.
Install is simply plumbed with 3/8" Fuel/Evap hose between Driver side rocker cover PCV port and intake manifold.
Bottle is upside down, removing cap nets a consistent ounce and a half of clean, wet oilly emulsion at each 5000 mile oil change interval.
Last edited by Fullpower; 08-18-2022 at 06:36 PM.
The following 4 users liked this post by Fullpower:
Thread
Thread Starter
Forum
Replies
Last Post
iregret
FORCED INDUCTION
6
02-16-2016 03:32 PM