Regency RST Complete Write-Up Info
#2302
On The Tree
Join Date: Feb 2012
Location: Topeka, Kansas
Posts: 110
Likes: 0
Received 0 Likes
on
0 Posts
Hey Red, would this one work?
GM (General Motors) - 24264182 - 98-02 LS1 F Body Slave Cylinder Also Fits Tremec T56 6 Speeds
Or this One??
Dorman CS360058 - Dorman Clutch Slave Cylinders - Application - SummitRacing.com
GM (General Motors) - 24264182 - 98-02 LS1 F Body Slave Cylinder Also Fits Tremec T56 6 Speeds
Or this One??
Dorman CS360058 - Dorman Clutch Slave Cylinders - Application - SummitRacing.com
#2303
Well i had a brand new slave but apparently it doesnt work right so instead of sending me the right **** to put on it, they tell me to put the stock 5 speed one back on it. Not a new one, the old one... I'm rdy to start roll'n heads!!!
#2304
Omg... im not even going to touch my truck billy until that part comes... It runs like **** and theres a ticking noise coming from the damn tranny or some place underneath it. This damn project is going to make me go bankrupt ffs!!!
#2306
I have no eff'n clue... He's already had this damn truck in his truck longer over a period of time trying to fix it right than when he had it for over 2 weeks to first install it all.
#2307
Launching!
iTrader: (1)
Join Date: Apr 2006
Location: Long Island, NY
Posts: 260
Likes: 0
Received 0 Likes
on
0 Posts
Just so everyone knows.....
The factory 17" Spare DOES fit with the RST Baer Brakes on both the front and rear. Got bored tonight and tried it out. Gunna try to get me another 17" steel rim and pick up some drag radials.
The factory 17" Spare DOES fit with the RST Baer Brakes on both the front and rear. Got bored tonight and tried it out. Gunna try to get me another 17" steel rim and pick up some drag radials.
#2310
LS 408 Short Block -4cc Flat Top Pistons 58 Tooth: High Performance Engines | ATK Custom Built Crate Engines
Thoughts? Gonna build it for turbo and NOS. Was hope'n for 650hp at least with turbo and another 100-150 hp more with nos.
The engine in the link is a -4cc Flat top; theirs also a -4cc Flat top 24 tooth, and a -10cc a -18cc and a -29cc Dished top with both 24 tooth and 58 tooth
or go this route, http://high-performance-engines.com/...duct_Code=SP33
Budjet wise im lookn at 10k to do it all. No matter what i decide the project will start in January.
Thoughts? Gonna build it for turbo and NOS. Was hope'n for 650hp at least with turbo and another 100-150 hp more with nos.
The engine in the link is a -4cc Flat top; theirs also a -4cc Flat top 24 tooth, and a -10cc a -18cc and a -29cc Dished top with both 24 tooth and 58 tooth
or go this route, http://high-performance-engines.com/...duct_Code=SP33
Budjet wise im lookn at 10k to do it all. No matter what i decide the project will start in January.
Last edited by Silver05Rst; 08-04-2012 at 07:03 PM.