PT Annual GTG Jackson, MS OCT. 2
10-01-2010 | 10:43 AM
#1221
Teching In
Joined: Dec 2006
Posts: 29
Likes: 0
From: Columbus, Mississippi
10-01-2010 | 10:43 AM
#1222
TECH Resident
Joined: Apr 2005
Posts: 969
Likes: 1
From: Spanish Fort, AL
10-01-2010 | 10:45 AM
#1223
TECH Resident
Joined: Apr 2005
Posts: 969
Likes: 1
From: Spanish Fort, AL
Bet!...Ill be to my parents house about 2...If yall dont have anything to do you can cruise by. Ill be rotating the air in my tires and greasing up my transmogifier
10-01-2010 | 10:51 AM
#1224
With that turbo and motor, you will need to bring the boost down to 43psi. anything more than that, it will bleed off. try dropping you psi down a bit and that should fix it. and make sure you have your rear defrost button pressed too. it helps with incoming air temps!!
10-01-2010 | 11:13 AM
#1227
Im trying to get my triple boost setup finished up before tonite... i have a pt76 feeding a f2 procharger then its feeding a tvs 2300. Im having a hell of a time trying to get it tuned 
it should be making a solid 68lbs and never run out of steam... i just dont know how long the 4.3 is gunna hold that boost
this better be good cuz im gunna actually wash my truck... and i put all the plastics back under my hood lol they havent been in there since i done my engine swap
it should be making a solid 68lbs and never run out of steam... i just dont know how long the 4.3 is gunna hold that boostthis better be good cuz im gunna actually wash my truck... and i put all the plastics back under my hood lol they havent been in there since i done my engine swap