replacement 918s ???
#1
replacement 918s ???
https://ls1tech.com/forums/showthread.php?t=803298
anyone else get on this?
bad batch No.
1) 49253
2) 049045
3) 49826
4) 050808
5) 051791
from LS1GTO
https://ls1tech.com/forums/showthread.php?t=728254
it is VERY difficult (if not impossible) for them to remedy any problems there might be with a spring by reading about it on the internet! So please, call CompCams at 800.999.0853 (that's their toll free tech line), and tell them you've got broken spring(s) and want to know what to do with them! Their customer service is second to none and they want to speak to you! Again, the only way they can fix a problem that might exist is to deal directly with the customer with the springs!!!
anyone else get on this?
bad batch No.
1) 49253
2) 049045
3) 49826
4) 050808
5) 051791
from LS1GTO
I spoke with my contact at Comp today, Chris Mays. If you have a spring batch number that is numerically less than 054168 you have the potential to have a bad set of springs. If you have a batch that is below this number, contact Chris Mays at Comp at 901-795-2400 extension 505. I just received my new springs next day air.
John.
P.S. Mods, you may want to make this sticky for a while...
John.
P.S. Mods, you may want to make this sticky for a while...
it is VERY difficult (if not impossible) for them to remedy any problems there might be with a spring by reading about it on the internet! So please, call CompCams at 800.999.0853 (that's their toll free tech line), and tell them you've got broken spring(s) and want to know what to do with them! Their customer service is second to none and they want to speak to you! Again, the only way they can fix a problem that might exist is to deal directly with the customer with the springs!!!
Last edited by Tootall; 02-04-2008 at 09:18 AM.
#2
TECH Junkie
iTrader: (8)
Join Date: Jul 2006
Location: OK
Posts: 3,895
Likes: 0
Received 0 Likes
on
0 Posts
Hmmm nice find... I'll have to check into that since I have a used set of 918's in a box waiting to be installed.
Just found some additional info on this...http://www.ls1gto.com/forums/showthread.php?p=3272880
Just found some additional info on this...http://www.ls1gto.com/forums/showthread.php?p=3272880
Last edited by truckmann; 10-23-2007 at 03:54 PM.
#7
TECH Junkie
iTrader: (8)
Join Date: Jul 2006
Location: OK
Posts: 3,895
Likes: 0
Received 0 Likes
on
0 Posts
There are several bad batch no.'s from what I have read and they are supposedly replacing all of them upon request. I read they are sending them out next day air with a return shipping label included to send the old ones back within 20 days.