Abear Motorsports-New Performance Trucks Sponsor
#1
Banned
Thread Starter
Join Date: Aug 2006
Location: Mukilteo, WA
Posts: 124
Likes: 0
Received 0 Likes
on
0 Posts
Abear Motorsports-New Performance Trucks Sponsor
www.AbearMotorsports.com
We make two-piece valve covers for GM's Gen. 3/4 V-8's (except BB).
Our covers are CNC'd in-house and modified to fit several applications. They hide the coil packs in a stock-like location so longer aftermarket plug wires, and coil relocation kits are unnecessary. They accept either your stock oil cap, or we can supply you with a chrome piece. Our covers also use the stock gaskets and valve cover bolts for a leak free seal.
Call, or email us for custom applications.
We make two-piece valve covers for GM's Gen. 3/4 V-8's (except BB).
Our covers are CNC'd in-house and modified to fit several applications. They hide the coil packs in a stock-like location so longer aftermarket plug wires, and coil relocation kits are unnecessary. They accept either your stock oil cap, or we can supply you with a chrome piece. Our covers also use the stock gaskets and valve cover bolts for a leak free seal.
Call, or email us for custom applications.
#5
High on diesel fumes
iTrader: (70)
I already had a great experience with Ryan, asked a question over on Tech about coil packs and fitment on different valve covers, and he went all out and got me as much info as he could, sounds like this company will have top notch customer service. Thanks again!
https://ls1tech.com/forums/showthread.php?t=584268
https://ls1tech.com/forums/showthread.php?t=584268
#7
Banned
Thread Starter
Join Date: Aug 2006
Location: Mukilteo, WA
Posts: 124
Likes: 0
Received 0 Likes
on
0 Posts
I already had a great experience with Ryan.Thanks again!
Will they fit a Radix'd engine?
We're trying to get a vartiety of test vehicles brought to the shop for test fits, so if you know anyone in the PNW with one have them give us a ring.
I suspect they would fit just fine as long as the 'charger is mounted in the traditional location.
We can do custom breather arrangements, just need to call or email with your specs.
Last edited by Ryan@ABear; 10-02-2006 at 07:28 PM.
Trending Topics
#8
Banned
Thread Starter
Join Date: Aug 2006
Location: Mukilteo, WA
Posts: 124
Likes: 0
Received 0 Likes
on
0 Posts
Is this first truck a Radix setup? https://www.performancetrucks.net/fo...ght=radix+pics
Looks like it would fit ok. Might be a little close under the TB.
Looks like it would fit ok. Might be a little close under the TB.
#10
Banned
Thread Starter
Join Date: Aug 2006
Location: Mukilteo, WA
Posts: 124
Likes: 0
Received 0 Likes
on
0 Posts
If anyone with a Radix setup could measure how far above the top of the oil cap the lowest part of the throttle body sits, I could guestimate pretty well from the pics.
And thanks for the good feedback.
And thanks for the good feedback.