Great Deal on Forged Pistons/Rods For Iron or LS2 Block!
06-21-2007, 09:18 AM
#1
FormerVendor
Thread Starter
iTrader: (4)
Join Date: Nov 2001
Location: Texas!
Posts: 4,104
Likes: 0
Received 0 Likes
on
0 Posts
Great Deal on Forged Pistons/Rods For Iron or LS2 Block!
We ordered a set of custom Diamond Racing forged dished pistons for a customer that has now decided to build a 402 cid LS2 stroker. Below is what we're selling:
*Diamond Racing 4.010" Bore, 3.622" Stroke, 6.100" Rod Length, -13.7cc Dish Piston Set, Custom-Built to Accept LS1/LS2 or L92 Cylinder Heads - New In Box with Wrist Pins
*Manley 6.100" Forged Connecting Rods with ARP Bolts - Used 10,000 miles
We are selling the pistons, pins, and connecting rods for $650!
This is a great deal for some looking to build a strong, forged setup. You can pair it up with a factory GM crank. Depending on the cylinder head and head gasket used, you can set it up with a compression ratio as low as 8.75:1 with a thick gasket and 72cc head or as high as 10.0:1 with a .040" gasket and 62cc head. It could be even higher if you decided to mill the heads. The $650 price does not include a ring set, but you could add a plasma moly ring set for another $150.
Give us a call with any questions or concerns. We have them in stock, ready for a new home!
Jason
Texas Speed & Performance
*Diamond Racing 4.010" Bore, 3.622" Stroke, 6.100" Rod Length, -13.7cc Dish Piston Set, Custom-Built to Accept LS1/LS2 or L92 Cylinder Heads - New In Box with Wrist Pins
*Manley 6.100" Forged Connecting Rods with ARP Bolts - Used 10,000 miles
We are selling the pistons, pins, and connecting rods for $650!
This is a great deal for some looking to build a strong, forged setup. You can pair it up with a factory GM crank. Depending on the cylinder head and head gasket used, you can set it up with a compression ratio as low as 8.75:1 with a thick gasket and 72cc head or as high as 10.0:1 with a .040" gasket and 62cc head. It could be even higher if you decided to mill the heads. The $650 price does not include a ring set, but you could add a plasma moly ring set for another $150.Give us a call with any questions or concerns. We have them in stock, ready for a new home!
Jason
Texas Speed & Performance
Thread
Thread Starter
Forum
Replies
Last Post
Closer_2001
GMT K2xx Trucks General Discussion
2
07-21-2015 03:25 PM
