single 10W1 in a reg cab S10
#1
single 10W1 in a reg cab S10
I'm looking at putting this sub, some JL C5 components and JL amp in a reg cab 2000 S10 and NOT lose any leg room. The components and amp will be easy enough but the sub looks to be a different story.
The only pre-fabbed box I've seen is made by Q-logic and all accounts say you will definitely lose leg room with it as it mounts behind the driver seat. The best way I can see doing it is putting it in the center. The trucks got the bucket seats and flip down console.
Is there a box made to put it in the center? Or one that doesn't limit the seat from going all the way back?
The only pre-fabbed box I've seen is made by Q-logic and all accounts say you will definitely lose leg room with it as it mounts behind the driver seat. The best way I can see doing it is putting it in the center. The trucks got the bucket seats and flip down console.
Is there a box made to put it in the center? Or one that doesn't limit the seat from going all the way back?
#3
Why is it a waste???? I save plenty, am single, no kids, all my bills are paid, both vehicles paid off, so why not?
Plus I'm geting the parts pretty much at or below cost. I might have 500 in the entire system. Deck included.....
Picking up my SS seats this week, and the new PI converter and tru-trac at the end of the week... The big trucks not being neglected.
Plus I'm geting the parts pretty much at or below cost. I might have 500 in the entire system. Deck included.....
Picking up my SS seats this week, and the new PI converter and tru-trac at the end of the week... The big trucks not being neglected.
#5
You know of some kids out there of mine???
Anyway... The few things I've done and plan on doing in no way affect the daily drivability of the truck. Like I already stated, I save, handle my business, and have two trucks paid for, and two classic motorcycles as well.
I work 85+ hours a week, I feel like I can do pretty much what I want with it, I spend anywhere from 1.5 to 2 hours a day in this thing, might as well have good tunes to listen to while I'm there..
That being said
Does anone know of a box for a single 10, that won't kill my legroom?????
Anyway... The few things I've done and plan on doing in no way affect the daily drivability of the truck. Like I already stated, I save, handle my business, and have two trucks paid for, and two classic motorcycles as well.
I work 85+ hours a week, I feel like I can do pretty much what I want with it, I spend anywhere from 1.5 to 2 hours a day in this thing, might as well have good tunes to listen to while I'm there..
That being said
Does anone know of a box for a single 10, that won't kill my legroom?????
Trending Topics
#8
Baltimore Whore
iTrader: (95)
Join Date: Apr 2004
Location: In a van DOWN BY THE RIVER
Posts: 16,820
Likes: 0
Received 2 Likes
on
2 Posts
HAHAHAHAHAH why, like I know
Have you tried these guys out ?? http://www.pickupspecialties.com/Sub...enclosures.htm
www.bassforms.com
Only other thing would be make your own if one isn't aval..
John
#9
TECH Addict
iTrader: (13)
Join Date: Dec 2007
Location: Bako
Posts: 2,546
Likes: 0
Received 0 Likes
on
0 Posts
I had a custom built box with a Treo SSI 10 in mine and i didnt loose much if any leg room. I think the box was 8" deep at the biggest part, But all that chit was stolen. I would have a box built in place of the center console and put something a little bigger in it. I am putting 1 JL 10W7 in my RCSB.
Here is a link to a box i seen awhile back.
http://www.subthump.com/gmre.htm
Here is a link to a box i seen awhile back.
http://www.subthump.com/gmre.htm
#10
something else
iTrader: (39)
HAHAHAHAHAH why, like I know
Have you tried these guys out ?? http://www.pickupspecialties.com/Sub...enclosures.htm
www.bassforms.com
Only other thing would be make your own if one isn't aval..
John
Have you tried these guys out ?? http://www.pickupspecialties.com/Sub...enclosures.htm
www.bassforms.com
Only other thing would be make your own if one isn't aval..
John