Cam swap tools in Houston area?
#1
TECH Apprentice
Thread Starter
Join Date: Feb 2003
Location: La.
Posts: 378
Likes: 0
Received 0 Likes
on
0 Posts
Cam swap tools in Houston area?
I plan to install the cam in my engine this weekend. That is if I can get ahold of an engine hoist to get the engine off the ground and onto my stand. Does anybody in the Houston area have a valvespring comepressor that I can borrow for the weekend? Or possibly a lifter holder tool? I want to get this engine swapped into my truck in about 2 weeks, and this is really the only thing holding me back. I am probably gonna be doing the swap by myself, so if anybody has done it before and wants to come over and help, you are more then welcome too. If you have one of both of these tools, either reply in this thread, or shoot me a PM. Thanks
#2
TECH Junkie
Join Date: Apr 2003
Location: Houston, TX
Posts: 3,350
Likes: 0
Received 0 Likes
on
0 Posts
I dont have the tools vicred but know someone that probably does. I have a friend that builds race cars and a shop in dayton-i can get a hold of him tomorrow sometime and let you know.
#4
TECH Junkie
Join Date: Apr 2003
Location: Houston, TX
Posts: 3,350
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by VicRed4.8
That would be great Xfactor. I live off of FM 1960. so im on the north side.
#5
TECH Fanatic
iTrader: (1)
Join Date: Jun 2002
Location: Houston,Tx
Posts: 1,843
Likes: 0
Received 0 Likes
on
0 Posts
too bad i dont live in houston any more i would tell you to bring it all over.
good luck though.
actualy post up the day or two before you plan on doing it i might be in houston actualy for the holidays.
good luck though.
actualy post up the day or two before you plan on doing it i might be in houston actualy for the holidays.
Trending Topics
#9
TECH Fanatic
iTrader: (3)
Join Date: Oct 2003
Location: Winston Salem NC
Posts: 1,612
Likes: 0
Received 0 Likes
on
0 Posts
I used a 1/8 rod wrapped lengthwise in velcro worked great
learnt that in the tools section
I made my own Vspring compressor
http://www.woracing.com/forum/viewto...r=asc&start=20
bolt is a 8mil
learnt that in the tools section
I made my own Vspring compressor
http://www.woracing.com/forum/viewto...r=asc&start=20
bolt is a 8mil
#10
TECH Apprentice
Thread Starter
Join Date: Feb 2003
Location: La.
Posts: 378
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by 02denali
man dude you can by the valve spring tool for about 20.00. then let me know and i will install the cam and all here if you want.
gamedawgx53: Thats a good idea about making my own. I checked out youre post, but I dont have a plave to cut down and notch the flat stock or all thread.