cranking torsion bars
#1
Thread Starter
9 Second Club
iTrader: (2)
Joined: Jul 2002
Posts: 2,585
Likes: 0
From: on the dyno tuning in MD
cranking torsion bars
I just picked up a 99 Z71 4x4 RCSB. I need to put new tires on it pretty much right off, and want to upsize a little on the stock rims. I am thinking 285x75x16 Yoko Geolander AT-IIs. I have read some say to crank the torsion bars to fit 285s - plus it does need to come up in the front to level it out. Does cranking the torsion bars effect the alignment any? I was planning to get it aligned anyway when I put the tires on, but wondered what effect cranking has. Thanks in advance for the help!
#4
I have cranked my stock torsion keys to fit the 285's on stock and aftermarket wheels with no problem of fitment, but did need to realign. Also then added the new torsion keys with different clocked position to get the same level without twisting them up as much for adjustment. I am currently running 17's with the 265's and they look good.
I have not noticed and have been told my truck still rides stock without being a rougher ride either???
I have not noticed and have been told my truck still rides stock without being a rougher ride either???
#5
285s fits really good wit the tbars cranked up, dont do the ford f150 keys, just crank up the bolts and get her aligned for sure... i never noticed the ride getting ruffer... heres a pic of torsion bars cranked and a add-a-leaf wit 285s just in case you were wonderin wat it looks like, this was actually after i took my body lift OFF to
#6
Thread Starter
9 Second Club
iTrader: (2)
Joined: Jul 2002
Posts: 2,585
Likes: 0
From: on the dyno tuning in MD
Originally Posted by beastmode
285s fits really good wit the tbars cranked up, dont do the ford f150 keys, just crank up the bolts and get her aligned for sure... i never noticed the ride getting ruffer... heres a pic of torsion bars cranked and a add-a-leaf wit 285s just in case you were wonderin wat it looks like, this was actually after i took my body lift OFF to
Trending Topics
#10
Thread Starter
9 Second Club
iTrader: (2)
Joined: Jul 2002
Posts: 2,585
Likes: 0
From: on the dyno tuning in MD
Originally Posted by beastmode
this truck is SCREAMIN for some 285s, looks good, i wish my truck was black
That pic is in the shop I tune for in the evenings. GM performance stuff - F-Bodys, Vettes, GTOs, Caddys and trucks.