New DD...I know I'm so COOL!
07-21-2012, 07:13 AM
#11
Why would you put wheels on it? It already has custom white ones!
Not the coolest set of wheels but very functional! You certainly should get a bubble window for each side!
Not the coolest set of wheels but very functional! You certainly should get a bubble window for each side!
07-21-2012, 11:33 AM
#17
I'm hoping with a shift kit and some smart transmission tuning this little guy should live...maybe but I plan on talking to Vince about it anyways.
Sweet!! My right foot hates me!! Do you have a link by any chance or any more info on how I would go about doing that? Can I salvage the cruise control off my 01 RCSB and put it on the van?
I should put a music box on top and play music from an icecream truck too!
Thanks, yeah truck is running real strong now thanks to Jake (smokeshow). He found that I had two bad injectors, weak coil packs and then tuned it because apparently the last tune was borderline. It's only at 9lbs (for no reason other than traction issues) and even that's a little much for it. I need some bigger/better tires before I do anything else.
Jake said that at 14psi the truck was spinning the tires in 3rd gear.
You have to flip the "R" so that it's backwards!
And then below it write "all kids welcum, all size and flavors..."
For the last time Dusty... YES you can drive it!! Can't tell you how annoying all you text messages are asking if you can drive it next time I come up!!
07-21-2012, 12:05 PM
#18
10 Second Truck Club
iTrader: (7)
Join Date: Jun 2002
Location: Shelby County, Al.
Posts: 1,058
Likes: 0
Received 0 Likes
on
0 Posts
I should put a music box on top and play music from an icecream truck too!
HaHa!! I knew you had thought about that!!
Glad your truck is doin good 
HaHa!! I knew you had thought about that!!
Glad your truck is doin good
07-21-2012, 12:25 PM
#19
You see, this is how it starts! You'll get a tune on it to get it back up to full dirtymax status...then built trans, then we'll see it at the track with a set of slicks... 
As long as the van runs the same cruise control switch assembly and same BCM, you should just be able to add some wires to the BCM connectors for the switch. It will need a re-flash, though.
As long as the van runs the same cruise control switch assembly and same BCM, you should just be able to add some wires to the BCM connectors for the switch. It will need a re-flash, though.
