Post up picks of your quad
#12
Baltimore Whore
iTrader: (95)
Join Date: Apr 2004
Location: In a van DOWN BY THE RIVER
Posts: 16,820
Likes: 0
Received 2 Likes
on
2 Posts
Sweet looking bikes guys.. Here is mine I am in the stages of doing(rather slow) but getting there... Started out a 2000 400ex(bought new) then I decided to tear it down.. Had it powder coated.. Have a tone of stuff ready to bolt on, new pro tap bars, tusk nerfs, the billet ods and ends, just not many pics.. Ohh and the 450R behind it (RIDE RED BABY )
Mods--
weisco 12-1 big bore (440)
stage 2 top end valve, head job (done by ppe)
studed head
450r carb
crf 450 timing chain
stg 3 hot cam
sidewinder sprockets (regeard)
upgraded cdi
billet hinson clutch basket
full polished hmf exhaust
full polished stainless bolt kit, brake lines
batt to air box mod
over size cooler, billet air box
itp rims, holshots for all the corners..
Yah my pics suk. Will try to update soon
Mods--
weisco 12-1 big bore (440)
stage 2 top end valve, head job (done by ppe)
studed head
450r carb
crf 450 timing chain
stg 3 hot cam
sidewinder sprockets (regeard)
upgraded cdi
billet hinson clutch basket
full polished hmf exhaust
full polished stainless bolt kit, brake lines
batt to air box mod
over size cooler, billet air box
itp rims, holshots for all the corners..
Yah my pics suk. Will try to update soon
#13
TECH Senior Member
Thread Starter
iTrader: (9)
Join Date: Aug 2003
Location: Cleveland Mississippi
Posts: 6,204
Likes: 0
Received 0 Likes
on
0 Posts
Yeah, what little fast straight line bikes we have are set up for dirt and short distances..........We don't really have any good sand here in the delta, so we set up bikes for the trails and mx tracks. I do enjoy getting in the air though and banging bars with other guys. I'd like to throw on a set of paddles and head down south to Sandhill in Wiggins, MS here soon. Supposed to be a pretty fun place to ride some sand. Glamis is alittle out of my traveling distance.
#14
TECH Senior Member
Thread Starter
iTrader: (9)
Join Date: Aug 2003
Location: Cleveland Mississippi
Posts: 6,204
Likes: 0
Received 0 Likes
on
0 Posts
Sweet looking bikes guys.. Here is mine I am in the stages of doing(rather slow) but getting there... Started out a 2000 400ex(bought new) then I decided to tear it down.. Had it powder coated.. Have a tone of stuff ready to bolt on, new pro tap bars, tusk nerfs, the billet ods and ends, just not many pics.. Ohh and the 450R behind it (RIDE RED BABY )
Mods--
weisco 12-1 big bore (440)
stage 2 top end valve, head job (done by ppe)
studed head
450r carb
crf 450 timing chain
stg 3 hot cam
sidewinder sprockets (regeard)
upgraded cdi
billet hinson clutch basket
full polished hmf exhaust
full polished stainless bolt kit, brake lines
batt to air box mod
over size cooler, billet air box
itp rims, holshots for all the corners..
Yah my pics suk. Will try to update soon
Mods--
weisco 12-1 big bore (440)
stage 2 top end valve, head job (done by ppe)
studed head
450r carb
crf 450 timing chain
stg 3 hot cam
sidewinder sprockets (regeard)
upgraded cdi
billet hinson clutch basket
full polished hmf exhaust
full polished stainless bolt kit, brake lines
batt to air box mod
over size cooler, billet air box
itp rims, holshots for all the corners..
Yah my pics suk. Will try to update soon
#15
Baltimore Whore
iTrader: (95)
Join Date: Apr 2004
Location: In a van DOWN BY THE RIVER
Posts: 16,820
Likes: 0
Received 2 Likes
on
2 Posts
Thanks, yah fun but slow.. Around here, it is alot of trail, woods riding, with some flats, but mostly ripping in the woods, with jumps and what not. I was going to opt for a set of good shocks and res's, along with a durablue widened axle. But I thought the bike felt great stock, so I am keeping it that way, maybe ad a set of spacers on the rear down the road. But it should do fine. Hell I used to hit pretty big doubles and never bottomed the stockers out... Hopefull it will bust that jetted and piped 450 behind it when I get it done... BTW I picked the same nerfs up as you, they are sexy man...
#19
TECH Apprentice
Join Date: Jun 2007
Location: Jersey Village,Tx
Posts: 364
Likes: 0
Received 0 Likes
on
0 Posts
For people that havent tried it check this Site out www.mudbuddys.com its in Ezzel Texas inbetween Hallettsville an Victoria. Theres a drag race track for quads with a sportsman tree, motor cross track, woodland trails, mud pits an ponds. Cabins/rv hook ups an so on. I used to go there every weeken when i lived back home with my parents.